Search results

I think from their homepage they state that they had a recall and those which were fixed are marked with a G above the serial number on the box. This page has more details. In terms of the differences, I believe the 19 gen 3 and 4 are largely the same, but the 17 gen 3 doesn't have the larger...

Seems reasonable, having it inflicted on you at work is one thing, having to put up with it in your own time is another. That said, the statement from the OP about "It's saved my accounts many times" isn't a great sign... I could bore on about this at length (but thankfully won't) about why...

Not sure you can really draw a link between the implementation of multi-factor authentication and a mass password reset. The blog post I found on Invision about implementing this suggests that it's optional (or can be set as such). Is there any reason you wouldn't want people to have the option...

I've had the Nano Hard in a CA M249. It's very easy to do, just solder the trigger wires to the switch (in blue below) and plug them in to the mosfet. Set of wires go to the battery, set to the motor and you can split off the ones to the motor so you can drive the box mag when you fire. Mosfet...

TM's comes with trades just fine. However I suspect the distinction that was being made was "fully licensed trademarks" costs more, rather than whether it has trades.

Have a look at the review on Reaper's Airsoft Youtube channel. I think they cover it there (they cover pretty much everything else about it). Also regarding the motors you've got the choice of the BASE which is probably only marginally different from the Black or the Ronin, and £40 cheaper again.

Is that recent news? They were still open a month or two ago and are still listing next weekend as a date on the Gunman website... In terms of "Atmospheric" pictures, mostly they seem to have people in them doing cool shit or looking tacticool, when we all know the actual atmosphere at airsoft...

I use Muc Off (sparingly) on the bolt on an SRS. Works well enough, but needs reasonably regular cleaning because it picks up dirt and grit. Partly this is due to the SRS bolt being permanently exposed (unlike VSR) and partly because where I'm playing at the moment has a lot of dust/dirt...

My experience is that deans connectors make a small but noticeable difference, but YMMV. If you want easier but better you could try XT60's but they're a bit bulkier and harder to reuse. For Mosfets, Gate do a range of them, from the very small that fit in the stock tube, to the more...

So anyway, I was on the internet looking at things I don't need and I found this... Remake of the bank robber mag carrying vest from HEAT. On pre-order for £150... (and I've just noticed they sell plush hand grenades too!)

Welcome back... Sounds fine as it is, like Speedbird says, just go out and run it. Only change I'd go for personally at this point would be switching the connectors out for Deans. - easy job and might get you a little free performance. I'd also stick to the 7.4s, but opinion differs. Slightly...

Best - There's a few bits of kit or guns that could fit the bill here, but actually thinking about it, the one that I've taken to pretty much every skirmish for at least the last 10 years has been my mesh face mask. I *think* it was one of the original Black Bear ones (seem to recall having to...

You might find this video helpful. Obviously ideal bb weight affected by how much power your DMR is allowed to put out. I lean towards "the heaviest you can get away with".  But that's very thumb in the air.

I've always found the U-R Tactical kit to be well made, and comes in a decent range of camo colours in most cases (pencott, ATACS, all the multicam variants, kryptek, etc). They've got a couple of options on there that might suit. A lot of what you spend comes down to if you want a fancy...

To be fair, with your throwing arm you don't really need a TAG launcher anyway...

I'm still waiting in the hopes that TM will release one. If they do the same job as they have on the polymer on the gun it should be good. Mind you, I'm still hoping they'll release some more mags, so...

Have you had it apart inside? I know one of the previous CA ones I had an odd loading platform that pushes things up, whereas the others basically use M4 hicap on its side. I've had a couple of different Bullgear ones and I'd recommend one of the inserts that fits into legit M249 cloth pouches...

I'm assuming you've checked out all the BullGear internal replacement parts but either can't or don't want to go down that route at the moment? What are the internals on this one anyway, is it the "loading platform" type? In which case, could you substitute it with the MAG brand version (I...

Pretty sure this was covered a while back if you search for "Airsoft Trajectory Project" it goes into quite a lot of detail. There's a section specifically on MEDs at different powers, etc.

Same here, on both counts. Good piece of kit.