Search results for query: *

Are these selector deletes still available?

I’m short stroked 4 teeth combined on a m130 spring and now all works as it should 

Not sure sensors may have been dirty from lube and grease possibly. Once put all back together it all works fine. May go back to M120 spring & 3 teeth short stroke as m130 may be overkill 

Yes I built this gun from scratch as wanted a high ROF for CQB, used a 130 To eliminate the risk of PME so fitted it then short stroked the sector to bring FPS down to 340. As on a m100 with 13.1 and a 11.1 I would def have got it. Surprised you haven’t to be honest?  Fixed it now. Took apart...

I’m getting overspin problems I think. As gun double, triples fires on semi. Not all the time but every 3 or 4 shots. And I can’t figure out why. spec is as follows gate Titan advanced mosfet 229mm 6.02mm barrel M130 Spring 13.1 SHS gears, short stroked 4 teeth (340 FPS) SHS HT motor...

Looking for some information on what settings to run on my gate Titan.  Spec is as follows g&g Wildhog 9” m120 guarder spring asg 30k boost motor shs/ra 13.1 gears short stroked shs piston & piston head Aoe corrected  340FPS always ran on giant power 1000mah 11.1v lipos i no...

Put in the M100 spring, G&G ifrit motor, 18.1 gears and was doing 300 FPS on .20. Put in the m110 and it’s going 340 so going to leave it on that setup. Is there any pre engagement worry’s with a 110 spring?

Nah I didn’t mean it to sound like you told me to do that sorry if it came across like that. It was another guy who was at my local site when I was there and it wasn’t going through chrono which I was going to accept but he then took my gun and tried which I mentioned above Yea that’s what...

Yes at the time it had 16.1 gears. Thinking about it Guy I let look at it did have the hop wound right up to try get it to shoot lower FPS as was way over when I went to local site to have it chronod. After speaking with sitting duck im going to refit the stock 18.1 G&G gears and the 25k...

Good morning all this is my first post, own a G&G wildhog 9” version which I have changed a few internal parts such as 16.1 gears, M100 spring, SHS/RA MOTOR, Prometheus 205mm inner barrel, 11.1 Lipo, used it a few weeks ago and it sheered all the teeth off the piston? I have replaced the...