• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here

Search results

  1. S

    Spring calculation

    My ex-AKS74U was short stroked by 4 teeth and ran a GPA M120 spring (from the great AK2M4) and was around 320fps on a 0.20g
  2. S

    TM M733 snappy semi build questions

    I was under the impression that the WH motor controller included AB? and might not play well with other mosfets?    Perun AB++ looks like a cool little unit
  3. S

    TM M733 snappy semi build questions

    Morning all, I have a new toy on its way in the form of a TM M733 “Colt Commando” Totally stock at the moment. I plan on checking how it runs as standard - accuracy, consistency and trigger response. No sense just replacing stuff for the sake of it! It will be run it on 7.4v as a CQBish...
  4. S

    Cheap MilTec 2L canteen fits perfectly in the SADF Battle Jacket bottle pockets (the big ones on...

    Cheap MilTec 2L canteen fits perfectly in the SADF Battle Jacket bottle pockets (the big ones on each side) Means that A) you can keep hydrated and B) stop the mag pockets flopping around. Might grab another and trim the top off to make a storage box for snacks and spares.
    • SSPKali
    • Profile post
  5. S

    Noddy MP5 grip angle question

    Hi all, I have a Cyma MP5 that I really like....except for the angle of the pistol grip! My M4s have all had quite vertical / chunky pistol grips (Magpie or Ergo) as I find this more comfortable on my wrists. On the MP5 there is no option to change out the pistol grip and with the fixed stock...
  6. S

    Ex attempting to sell me back my RIF - Is this an offence under the VCRA?

    My first thought is “does she have a reasonable justification for a RIF?”! Hope you get it sorted mate, onwards and upwards!
  7. S

    THE TM MWS thread

    TM or GM nozzles all the way. DP ones are brittle and shatter. Some have had good luck with the v2 Angry Gun ones.
  8. S

    THE TM MWS thread

    If the BBs look to be going straight but the sight is off to the left it sounds like you just need to adjust the rear sight windage (side to side adjustment) to match the BBs point of inpact. The hop up adjustment is detailed in the instructions, if you didn’t get a paper copy you can find the...
  9. S

    THE TM MWS thread

    I would clean and lube the cup seal to make sure the nozzle can move in the bolt carrier smoothly. Did you replace the rocket valve spring too? That being stiffer / longer will increase the FPS. For reliability you only need to swap out the nozzle return spring (the one in tension), the rocket...
  10. S

    THE TM MWS thread

    I tried the Madbull and AI metal adapters and never got them to work even with o-ring mod. Some people found the plastic AI adapters worked better. Unfortunately AI are no more so don’t know what a good choice would be.  With ASG Ultrair being on offer and propane prices rising quite a bit I...
  11. S

    THE TM MWS thread

    Check the little horizontal arm sticking out the front of the nozzle isn’t pushed up (if it is it will ride over the top of BB in the mag, not push it into the chamber)
  12. S

    What have you made?

    Raid modded my Helikon BDU shirt. Wrist adjuster and chest pocket buttons replaced with velcro. Lower pockets removed and large loop velcro patches added. These were then attached to the upper arms. Also bar tacked over a small rip. Quite a productive afternoon given how bleedin’ hot it was...
  13. S

    THE TM MWS thread

    I have the G&P one and after replacing the plastic (!) grub screw with a stainless one and a dab of loctite it has been working well. Have an RATech in the spare nozzle as well and they both do the same job, might be down to what is in stock :)  
  14. S

    Where a real PC should sit on your torso

    I have a PC but mainly use it with weighted plates for running in! Once this weather cools down a bit I will probably run it for the odd colder game day when I am just using the M4. I have it adjusted correctly as with 12lb plates in you need it correctly placed to avoid painful rubbing.  TBH...
  15. S

    THE TM MWS thread

    Hao stickers are to fix issues with their bolt carrier. If you are using the stock TM one you won’t need it. BB choice is a mien field as there are so many variables. Search back a few pages and I published my results from shooting groupings from a clamped rifle at 10m. Diagonal spread went...
  16. S

    THE TM MWS thread

    Sounds like that was a milspec threading which is close but not close enough.
  17. S

    THE TM MWS thread

    If the rail is an airsoft std one the mounting nut should screw straight on. Milspec one will need the receiver rethreading! If you change the barrel nut you will need a shim to make sure the barrel nut holds the outer barrel that is different diameter to AEG ones. Not tried it but apparently...
  18. S

    120 or 30 rounds mags ???

    I run an MWS so 35rds is the standard. In CQB type games I probably get through 2 maybe 3 mags tops. I carry 3 spare mags and a full 90rd speedloader so I can top off empty mags as I walk to respawn, the mags contain enough gas for ~100+ shots but only 35 bbs…. Woodland I carry 6 spare mags...
  19. S

    THE TM MWS thread

    FireSupport often have the G&P npas in, best to replace the plastic screw with a stainless hex grub screw (think I have spares, happy to post one if anyone needs one) With a dab of loctite it doesn’t work...
  20. S

    The Bro Science Guys Were Right!

    Aaaaand that’s a s5 firearm. Go directly to jail, do not collect $200 ?
View older results
Back
Top