Gun picture thread

[Shep120181]

TM Taran Tactical "sand viper" g17
Boomarms slide set, magwell, mag bumper and trigger
Guarder lower stippled by Armsaholics
All guarder internals
Just need an RMR and X300 and it's complete, maybe a TTI hop unit
Mag bumper is really loose so I need to look at shimming it but otherwise the assembly of the slide was straightforward.
View attachment 19607View attachment 19608

Click to shrink...

Love this

 

[Shep120181]

Another one. Ed Brown/ZEV sight tracker Hicapa.

I don’t think Ed every did a 2011… but the slide is based off a relatively well known ZEV collaboration he did before he passed.

The real steel was optic ready, so shame GSB chose not to make this one optic ready.


View attachment 19829
View attachment 19828

Click to shrink...

Another stunning pistol pal

 

[TheFull9]

Currently working through a big ol' batch of edits.

 

[MistakenMexican]

Finished building this today.
It stared as a Kizuna Works G-CAPA (BSK43).
Out of an exercise of education, I’ve taken it apart and changed as much as I can.
The only thing that needed some real modification was the blowback unit. I had to shorten the piston and change the shape of the BBU to allow for glock mags.

Quite pleased with it! Partly because it will offend so many hicapa fans

Fitting the slide and upgrade parts were recorded and put on YouTube:

View: https://youtu.be/CjBLiryy3Sk?si=ZWoL0i-zcSTtcgi8

 

[tside]

Packed up for the weekend. Gunna rock the arcturus pp19 and the specna edge M4 with my "zone stalker" kit

 

[Shep120181]

Finished building this today.
It stared as a Kizuna Works G-CAPA (BSK43).
Out of an exercise of education, I’ve taken it apart and changed as much as I can.
The only thing that needed some real modification was the blowback unit. I had to shorten the piston and change the shape of the BBU to allow for glock mags.

Quite pleased with it! Partly because it will offend so many hicapa fans

Fitting the slide and upgrade parts were recorded and put on YouTube:

View: https://youtu.be/CjBLiryy3Sk?si=ZWoL0i-zcSTtcgi8


View attachment 20850View attachment 20851

Click to shrink...

Holy s#*t I follow you on YouTube I had no idea this was you

Dude love your videos

I just watched this video bud earlier this pm

 

[theSwede]

Finished building this today.
It stared as a Kizuna Works G-CAPA (BSK43).
Out of an exercise of education, I’ve taken it apart and changed as much as I can.
The only thing that needed some real modification was the blowback unit. I had to shorten the piston and change the shape of the BBU to allow for glock mags.

Quite pleased with it! Partly because it will offend so many hicapa fans

Fitting the slide and upgrade parts were recorded and put on YouTube:

View: https://youtu.be/CjBLiryy3Sk?si=ZWoL0i-zcSTtcgi8


View attachment 20850View attachment 20851

Click to shrink...

Nice! I’ve missed your yt chanbel. Since I myself is dedicated to TM Glock builds i’m definetly gonna check it out!

 

[Kls77]

My new Well pp19 gbbr . Waited a while for it well worth the wait too . Love it

 

[Enid_Puceflange]

 

[Big Cheese]

Specna Arms PDW with PRI rail.

 

[Tackle]

View attachment 21115

Click to shrink...

Is there a prize for guessing what it is ?

 

[ButcherBill]

Is there a prize for guessing what it is ?

Click to shrink...

An OSW from Airsoftworld.

 

[MrTea]

Finally finished building the TP-22. Absolutely stupidly easy to disassemble and change parts on this. The only finnicky thing is getting the hammer assembly back into the rear of the frame as there's one spring that's very easy to pinch between the assembly and the frame which will bend it. The adjustable trigger and enlarged mag release are absolute must buys for this pistol. I've got the trigger set so there's only the tiniest bit of pull before it hits the wall and the enlarged mag release is way more comfortable to use than the stock one.

As an added bonus, the hop arm used in the gun accepts omega style nubs and applies (basically) zero hop when set to zero even with the size difference from the standard round/cylindrical nub.

The comp makes the pistol too long for the Omnivore holster I have but that's nothing a dremel can't fix

 

[mightyjebus]

Finally finished after way too much time, money and effort to rebuild this TM NGRS SCAR H.

 

[The_Lord_Poncho]

The comp makes the pistol too long for the Omnivore holster I have but that's nothing a dremel can't fix

Click to shrink...

Dremel off the comp I presume

 

[Alimcd]

Work has been extremely busy recently so I decided I deserved a present.

New Capa and new WA/GHK hybrid AR

Capa is completely 5KU externally, got to say, they’ve come a long way. You’d be hard pressed to tell this apart from the Airsoft Masterpiece or GSB Infinity IMM kit and the tolerance/fit of slide and frame is exquisite




Mini AR is an odd one, had a pile of parts in my garage and decided to finally slam them together into an actual gun. Very happy with the outcome

Behold 4 furious inches of discontinued G&P glory