Recent content by xB0SHx

I've had one for a bit. Skirmished 2 or 3 days with it and coming from hi caps I reload a lot. Its held out so far and it's night and day vs the plunger style 

It's slightly different. Didn't think about it needing to be a harder material. Because of it making it thicker with the key it pulls down towards the back of the barrel so I might need to make it into a T instead of an I

I'll give it a go. Was fine with slightly warmer weather. Need to play with the hopup unit as it was curving left badly again. I suspect the I key shifted positions. The one sided tension arm isn't the best design. Can't find an aftermarket hop unit for it either 

Haha it's looking like the way forward ? at least I can sell some mags after to recoup some of the money this guns swallowing. Do you reckon running 3.0 will solve my issue for the moment? 

Tried running nuprol 2.0 today and gun wouldn't cycle because it kept freezing up, rookie didn't take any other gas with me. Has anyone hpa tapped the mags and how? Asking because the plate at the bottom that holds the spring has a small hole where the fill valve is and don't know if it'll need...

I use the mws warmag from softair website. Pretty pricey but has worked so much better than the normal speed loaders.  Fitted the I key and tnt bucking to the type 89 today. With some bending,  filing and a touch of super glue it's shooting about 65 metres on .32s consistently. Its the furthest...

If you were to supply it all and just send finished product what would you be looking at charging?

I'm also curious about this because let's be honest it's gonna happen anyway so why delay the inevitable  He's not the best at keeping you updated but I ordered a couple weeks ago and it came within a couple days. 

I'm unsure. I do know that the we one definitely isn't right. The teeth are too thick. I filed mine down slightly and it worked 

Me! Me!  I'll have to get on that street corner for a bit first though. 

Going to order the maple leaf as well just so I can compare the two. There's so many choices, decepticon, autobot, super, monster. Which one should I get and what degree? 60?

Perfect. I'll get them ordered up cheers

Ok so these? Does the I key fit under the tensioner? Because you turn the dials on the side and it's pulls that arm down. Its easily over hopping .32s 

So if anyone who has type 89 the super nub doesn't fit as it has no nub ?  Is there a solution to this? I'll try it with the tan bucking as the gun is already in bits and see if this will improve at all

That is impressive. Pure mag envy