• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here

Recent content by TommyH88

  1. T

    EVO Fire Selector Delete

    Are these selector deletes still available?
  2. T

    Overspin I think, double, triple fire on semi?

    I’m short stroked 4 teeth combined on a m130 spring and now all works as it should 
  3. T

    Overspin I think, double, triple fire on semi?

    Not sure sensors may have been dirty from lube and grease possibly. Once put all back together it all works fine. May go back to M120 spring & 3 teeth short stroke as m130 may be overkill 
  4. T

    Overspin I think, double, triple fire on semi?

    Yes I built this gun from scratch as wanted a high ROF for CQB, used a 130 To eliminate the risk of PME so fitted it then short stroked the sector to bring FPS down to 340. As on a m100 with 13.1 and a 11.1 I would def have got it. Surprised you haven’t to be honest?  Fixed it now. Took apart...
  5. T

    Overspin I think, double, triple fire on semi?

    I’m getting overspin problems I think. As gun double, triples fires on semi. Not all the time but every 3 or 4 shots. And I can’t figure out why. spec is as follows gate Titan advanced mosfet 229mm 6.02mm barrel M130 Spring 13.1 SHS gears, short stroked 4 teeth (340 FPS) SHS HT motor...
  6. T

    Gate Titan settings

    Looking for some information on what settings to run on my gate Titan.  Spec is as follows g&g Wildhog 9” m120 guarder spring asg 30k boost motor shs/ra 13.1 gears short stroked shs piston & piston head Aoe corrected  340FPS always ran on giant power 1000mah 11.1v lipos i no...
  7. T

    Opinions on my setup

    Put in the M100 spring, G&G ifrit motor, 18.1 gears and was doing 300 FPS on .20. Put in the m110 and it’s going 340 so going to leave it on that setup. Is there any pre engagement worry’s with a 110 spring?
  8. T

    Opinions on my setup

    Nah I didn’t mean it to sound like you told me to do that sorry if it came across like that. It was another guy who was at my local site when I was there and it wasn’t going through chrono which I was going to accept but he then took my gun and tried which I mentioned above Yea that’s what...
  9. T

    Opinions on my setup

    Yes at the time it had 16.1 gears. Thinking about it Guy I let look at it did have the hop wound right up to try get it to shoot lower FPS as was way over when I went to local site to have it chronod. After speaking with sitting duck im going to refit the stock 18.1 G&G gears and the 25k...
  10. T

    Opinions on my setup

    Good morning all this is my first post, own a G&G wildhog 9” version which I have changed a few internal parts such as 16.1 gears, M100 spring, SHS/RA MOTOR, Prometheus 205mm inner barrel, 11.1 Lipo, used it a few weeks ago and it sheered all the teeth off the piston? I have replaced the...
See more
Back
Top