• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here

Recent content by Rob360

  1. R

    G&G Warthog upgrades

    Thanks Colin, I've spoken to AK2M4 and a couple of xt springs are on the way. Hopefully this is all that is needed to rectify the power loss. 
  2. R

    G&G Warthog upgrades

    Hi all, Off the back of my Specna adventure I also decided to upgrade the Warthog 12".  Replacing the standard 330mm 6.08mm barrel with a ZCI 340mm 6.02mm barrel.  New ZCI rotary hop and Maple leaf maceron 60 and omega nub.   Before I did the upgrade I played a site yesterday, the gun...
  3. R

    Specna SA-E11 Edge modifications help

    Thanks for all the replies. I've learnt a lot, now to order a stronger spring and cylinder and have a play :)
  4. R

    Specna SA-E11 Edge modifications help

    I'm really not familiar with the gearboxes yet, are all cylinders the same size, just ported differenlty for different barrel lengths?  Is that all i'd need to change to compensate for the smaller barrel? 
  5. R

    Specna SA-E11 Edge modifications help

    What would you recommend to do to do it correctly, I don't want to destroy the gearbox. I have no idea on the internals of the gearbox,  I found this on the internet about what's inside it: reinforced polymer piston. – aluminum, sealed nozzle – aluminum, double sealed cylinder head –...
  6. R

    Specna SA-E11 Edge modifications help

    Hop completely off on testing for both barrels.
  7. R

    Specna SA-E11 Edge modifications help

    Thanks guys, what spring would you recommend?  Currently has M100.  Glad I don't need to do something with the cylinder volume or gearing. 
  8. R

    Specna SA-E11 Edge modifications help

    Hi All, I'm new to airsoft, but wanted to modify the SA-E11 becasue I didn't realise when I got it that the barrel was 300mm long and was full length inside the silencer.  I wanted to replace the silencer with a shorter tracer unit.  So to achive this, I took the silencer off and measured the...
See more
Back
Top