Recent content by mirinjawbro

i use an upgraded mp5 for games (not been for a while) this was more more messing about with the QCS and having something not many people have like you said. need to get some measurements going on the battery length and extended stock :)

just back garden for now.

seems like this could easily be the same cost as the gun was to begin with

im not sure on that. have been asking claude and google AI and both say different things. one says you MUST change the piston to a metal tooth one. other says a 11.1 volt bigger battery will be fine. i then ask whos better and they both disagree with eachother

sorry this is king arms. i have a 11.1 but its way to "fat" to fit normally. hoping the extensions can have it all

Hello all. sadly can only run (i think) a 7.1 ish V battery in a normal P90 stock i don't really want to run externally. any ideas? thanks

super glued the shell together along the back 1/3 . all fine now seems bad quality control / crap

Did the camo shell come with its own set of screws? If so, my below questions are relevant to that: nope. just the shell in 2 halves. Was they easy to remove initially? 10 x easier than the new camo shell With both parts of the shell off and empty, do the screws go back in properly and at...

i thought the same. but the screws are direct swap from the original body. the rear did not have any. the gearbox and battery go there. when looking at the old body the 4 rear all all still in tact and do not join

the 2 images on the trigger area are from a long bolt that has gone through the body. this is tight and fine. the last 2 pics are the last 1/3 of the gun. there is no "long bolt" that goes through any part of the last 1/3 pulling it all together. wondering if i could get some sort of velcro /...

the pics above show the rear 1/3 where they are mock screws. they are also mock on the original

inserted pics. the 4 "bolts/ screws" are just mock. on the original they also do not go all the way through but its way more solid / stable

2 x small and 3 x long - the small go at the front of the gun. all nice and tight now. the other 3 are around the trigger area and 2/3 the last 1/3 has the 4 x mock screws. the gearbox i can feel and hear is moving slightly so semi auto is something firing twice or on full. . full auto is...

so the rear 1/3 has 4 "mock screws" on both the original and new. when looking at the old shell these 4 screws do not cross through both sides so not bringing them close together there were 5 large screws on the original body that ive now replicated onto the new (very tight) . the front 2/3...