• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here

Recent content by AvidAirsofter776

  1. A

    ASG "auto stop" charger never stopped charging

    I've since changed to Lipo and am currently loving it, it just works so much better!
  2. A

    ASG "auto stop" charger never stopped charging

    I have been thinking about making the change to lipo, however there is no such thing as an 8.4v or 9.6v lipo that I can find. I wouldn't like to go as low as a 7.4v because it'll be a slug to shoot and I'm worried 11.1v will ruin my motor, and I'd have to get a MOSFET, which all adds up to way...
  3. A

    ASG "auto stop" charger never stopped charging

    Exactly. On the first charge after only an hour it was too hot to touch. Completely befuddled by it.
  4. A

    ASG "auto stop" charger never stopped charging

    I bought a VP racing 8 cell 9.6v battery and web auto stop charger to replace the previously fried batteries due to a non auto stop charger. Turns out neither stop. Anyone else seen this and any tips for the future?
  5. A

    Making a Maska-1sch inspired fast helmet add-on.

    Another thing to take into consideration is the material you use and how thick it is. The steel I am using is 1mm thick. At first I was sceptical about the integrity of this steel against high powered airsoft rifles. I was swiftly proven wrong when a 450 fps sniper didn't even scratch it. I'd...
  6. A

    Making a Maska-1sch inspired fast helmet add-on.

    Now I just need to transfer the template onto the sheet steel. I do this by using small magnets to hold the paper down while I trace it with a Sharpie. I have already done this but I was unhappy with the shape of the bottom as it was too square. Looking at reference photos, there is a taper to...
  7. A

    Making a Maska-1sch inspired fast helmet add-on.

    The second step was to create a template. I am still working on this as I have only images for reference. Here is a picture of a very rushed template! This is definitely not my final as I believe it to be much too long.
  8. A

    Making a Maska-1sch inspired fast helmet add-on.

    Hey guys! So all my stuff has arrived and I can finally get started with it. Attached is a photo of my fast helmet with the face shield attached. I have drilled out the rivets using a dremel tool and replaced them with bolts. Don't worry, I am planning on cutting them down!
  9. A

    Making a Maska-1sch inspired fast helmet add-on.

    Don't worry guys haha, I intend to wear full face protection underneath, this project is mainly for looks and I can't wait to hear it getting shot! The stuff hasn't arrived yet but it should soon! I'll get back to you when it does.
  10. A

    Making a Maska-1sch inspired fast helmet add-on.

    Hey guys, ever since I've started playing airsoft, I've always imagined what it would be like to have metal armour! I've also always loved the design of the maska-1sch with the small slit for vision. I've decided that I've set out to make my own as I am not willing to pay £150+ for a whim. So I...
  11. A

    Ghillie suit for arms, head and back?

    I understand that you may need to change the scrim, and those scg suits are a just a little bit over my budget! My only issue is why a vest with a net on it is worth over 100 quid and how you'd apply the strands to one. I will most likely be making my own completely from scratch as I can't...
  12. A

    Ghillie suit for arms, head and back?

      I've looked everywhere for a ghillie suit that just covers the arms, back, and head. Similar to the photo attached.i believe these are known as "togs" however I can only find then without the strands. Has anyone seen these available or know where I could get one? Preferably for woodland and...
  13. A

    Sniper chest gear?

    That's what I've done before, kept my distance but we decided to try a free for all. There wasn't much cover either as I use the bushes to my advantage most of the time.
  14. A

    Improve mesh goggle visibility?

    yeah, that does make sense but the black paint was gloss, so it reflects the sunlight. It's really annoying and makes it hard to see sometimes.
  15. A

    Sniper chest gear?

    The marshal talked to him about it and it was his first time. It just goes to show that people don't listen to important stuff like the rules.
See more
Back
Top