• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here

Recent content by Aux

  1. A

    Upgrading my replica

    Hello I've recently carried out an upgrade on my stock Specna Arms SA E08, upgraded to 13:1 shs gears, XT high torque motor 22TPA, new piston heads, costed around 65£, motor was only 30£. It was absolutely worth it, trigger response was amazing even without precocking. With precocking, the...
  2. A

    Gears and motor

    Absolutely blew my head sanding 2-3mm off base plate made the temp go from 75degrees way down to 35 max.
  3. A

    Gears and motor

    Exactly this! The guy at ak2m4 told me to try to find the perfect height with my thumb and found out that the base plate was too thick even when the middle screw was taken out, sanding it down made it work without overheating.
  4. A

    Gears and motor

    Unfortunately no, I've reached out to him and he offered for me to send it back so he can run some tests on it, i managed to lower the temperature of it by a 5 degrees though it still reaches around 75 degrees with 1 mag of quick semi. The motor itself looks high quality and strong magnets too...
  5. A

    Gears and motor

    i see it doesnt really affect functionality so i'll just stick with it Bit of a bigger problem though is that I've noticed very fast heating of the motor, we talking about 35 to 40 shots of semi. I fitted my stock motor(14tpa) back in and it wasn't overheating, which is so weird cause surely...
  6. A

    Gears and motor

    Yep @Colin Allenwas kind enough to send me a perun ab++, so should work fine wwith 11.1V batteries
  7. A

    Gears and motor

    Cool thank you will give it a bit of adjust later. In regards to the air nozzle sticking out is that normal?
  8. A

    Gears and motor

    Cheers, i think i've done it right, the gun currently sounds like this, is that somewhat a good shimming job? IMG_1564.mov   Also i noticed my first shot after loading in mag doesn't fire anything the nozzle seems to be pushing forwards a little bit, could it be the cause of new piston?
  9. A

    Gun barrel and shimming

    Got it just ordered some 11.1v from the website, should work fine.
  10. A

    Gears and motor

    Could you elaborate more on not shimming the sector gear too high? As in don't shim the tappet plate too close to the gearbox shell? If the tappet sits flat on the sector gear and not bend upwards is that a sign of good position? Yep just ordered some new 11.1v.
  11. A

    Gears and motor

    Perfect thank you for your help mate. Parts arriving tomorrow hopefully all goes well. yep okay, i've heard shs gears are quite durable just wanted to get a second opinion and now i won't be overthinking about the gears blowing up. 
  12. A

    Gun barrel and shimming

    Oh awesome half the price. Any problems with overheating and such at all? what about the gate x asr2 is that any good compared to my x asr?
  13. A

    Gun barrel and shimming

    Yep waiting for akm4 to ship it out now, hopefully it works.  Any particular mosfet you'd recommend? Also are there any websites for cheaper nuprol batteries, 11.1v seems to be a bit pricy on amazon for only around 1200mah,
  14. A

    Gears and motor

    As i've heard 11.1v could burn out my x axr mosfet, strain the motor, gears more, and also just haven't bought one yet. 
  15. A

    Gears and motor

    Hi all,  Wanted to get some advice from experienced aeg owners about gear ratios.  Basically im upgrading my motor from specna arms stock to xt high torque 22tpa, but im really stuck between 13:1 or 16:1 gears, as i want good trigger response but don’t want to stress the motor too much...
See more
Back
Top