• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here
ak2m4

ak2m4

Members 51 From Kent
Joined
Last seen
Messages
1,318
Feedback score
+0 /0 /-0
Reaction score
679
Points
36

Profile posts Latest activity Postings About

  • pyromancer6
    Any idea when you're getting the J-cage bearings back in stock bud? Turns out the CYMA bushings are a bit too shonky for SHS 13:1s..

    ak2m4
    ak2m4
    I am testing for some now but I really recommend going for bushings if your having shimming issues

    pyromancer6
    pyromancer6
    Thing is - I have no room for shims with the standard CYMA bushings at the min and putting the old bearings in from my CYMA platinum that neg built for me means I can add shims and it's a lot quieter - but they don't quite fit the holes and pop in and out a bunch and it's making me nervous that they might give up the ghost, hence me looking for new ones. Might consider the XT bushings now that you're mentioning them though..

    ak2m4
    ak2m4
    Some bushings / bearings sometimes require a little bit of retaining compound or glue to hold them in place.  With bearings if you try to force fit them you can damage their structure quite easily.

    pyromancer6
    Ordered a gearworks/macaron from the site recently for the MP5 and while it was working great the nub wasn't playing nice [because MP5 hop units are a pain in the ass] and I ended up cutting it to fit on the gameday and it ended up all pissed (was on the bench outside before playing so it wasn't the best job ?), is there a slightly less wide nub you'd reccomend or would it be a good idea to just order a fresh gearworks/XT nub and actually cut it straight? Cheers

    View previous comments…
    pyromancer6
    pyromancer6
    Planning on doing a order of a few bits for delving inside one of the pews because a jam's knackered the airseal stuff inside so I'll let you know - heart of gold you've got by the way haha, appreciate it

    pyromancer6
    pyromancer6
    Just recieved my order today, probably should've clarified it was about this post rather than putting a random message about a stanley knife haha, appreciate it bud ?

    ak2m4
    ak2m4
    AHH ok lol.  I get lots of orders from guys on the forum but they use their real names so never really know who anyone is.  Internet animosity just as it should be ?

    pip robins
    looking for the spring on this part  , can you help me please eld chep , be most indebted 
    image0.jpg


    Steveocee
    Hello, I appreciate you may have some stock flow issues ATM but do you know when you'll be getting some more suppressors in? Really trying to get my hands on something 200mm long with a diameter 30-34mm?

    W
    Didn't realise you were on here. I think just bought a Strike Industries Viper stock from you on ebay (y)

    ak2m4
    ak2m4
    Hey mate, yeah been on here for years now.   I dip in and out when I have time. 

    Also have www.ak2m4.co.uk and on FB :-)

  • Loading…
  • Loading…
  • Loading…
Back
Top