Upgrades

[Callumw95]

If you /had/have a krytac mk2 tri crb, what would/done to it to upgrade it as im looking to spend some money on it and get it working like a beast

 

[Georgeturner2001]

Should perform like a beast anyway, mine does.

What do you want to improve?

 

[Callumw95]

Yes so does mine but want more accuraccy so thinking hop/barrel/ rubber

 

[Georgeturner2001]

I'm pretty sure you'd only get a little bit more accuracy, so is it really worth it?

Have you tried using heavier BBs?

 

[Callumw95]

Use .25 atm any, do u think i should go heavier

 

[Georgeturner2001]

I use .25 in my SPR and it's great, maybe try .28?

 

[Callumw95]

I guess its just me being greedy but everynoe and then i fire 2 bbs, im running a 7.4v 30c lipo?

 

[Georgeturner2001]

You could improve trigger response by using an 11.1, and maybe getting rid of the mini Tamiya and use deans instead.

If your looking for rate of fire I get 25rps on an 11.1v 40c battery and an m100 spring.

 

[Callumw95]

Im mainly semi auto, cqb sites but trigger responce is good idea, may get some 11.1v 40c if that would do nicely?

 

[Georgeturner2001]

20k motor version?

 

[Callumw95]

Im not 100% sure i personly think its 30k 1 at its rof is monsterous

 

[PT247]

Only thing you need to improve a Krytac is cosmetic. I have tried PDI and Prometheus inner barrels, I've tried flat hop, different hop chambers, different motors (30k and 20k) and different batteries. If you can run at 350 fps then change the spring to get it as close to that limit with your hop set for the weight of BB you use (but chrono on 0.2g BBs obviously or go by joules). If you play CQB then get it as close to site limit. If you play outdoors then you could lock it to semi-auto and boost fps to DMR limits if your site allows M4s as DMRs.

I run my PDW with a standard barrel and the 20k motor now with standard hop unit and rubber/nub. Only thing I do as a "performance upgrade" is run an 11.1v LiPo. I also use 0.3g ProBall BBs.

 

[PT247]

Im not 100% sure i personly think its 30k 1 at its rof is monsterous

if it is a UK gun it'll be a 20k. Easy enough to check though.

 

[PT247]

Use .25 atm any, do u think i should go heavier

use as heavy a BB as you can reliably lift!

 

[PT247]

Im mainly semi auto, cqb sites but trigger responce is good idea, may get some 11.1v 40c if that would do nicely?

DO NOT use a 40C LiPo, use a max 30C

 

[ImTriggerHappy]

You won't improve it you will only make it worse.

To get the best out of a gun isn't just about chucking the best parts inside it's about everything working together correctly, its a balancing act. Krytac did a good job with the trident range and most so called upgrades people have done are a waste of time.

 

[Hangtight]

You won't improve it you will only make it worse.

To get the best out of a gun isn't just about chucking the best parts inside it's about everything working together correctly, its a balancing act. Krytac did a good job with the trident range and most so called upgrades people have done are a waste of time.

Could we please make this a big, shouty automatic reply everytime anyone asks, "What should I buy to make it betterer?".

 

[Callumw95]

Cheers all, ill take all on bored, ill get some 11.1v lipos 30c max and use some .30 bbs

 

[Katana]

Bro has Mk2 SPR and is planning on chucking in a Gate Titan, Lonex A2, Prommy 6.03, Prommy purple bucking, prommy flat nub, Lonex air nozzle.

Bit of dremelling for the Gate Titan to fit. Switch the pinion on the A2 for the Krytac one on the 20k motor or just see how well the Lonex pinion meshes before doing the switch as might not have to.

Prommy purple is arguably one of the best buckings.

Flat hop nub gives incredible range next to the R-hop.

Gate Titan will fix the whole overspin issue (only very slighty overspinning).

Lonex air nozzle will solve the compression problems as Krytacs have a slight air seal issue with the nozzle as the nozzle has no o-ring. 

 

[ImTriggerHappy]

Bro has Mk2 SPR and is planning on chucking in a Gate Titan, Lonex A2, Prommy 6.03, Prommy purple bucking, prommy flat nub, Lonex air nozzle.

Bit of dremelling for the Gate Titan to fit. Switch the pinion on the A2 for the Krytac one on the 20k motor or just see how well the Lonex pinion meshes before doing the switch as might not have to.

Prommy purple is arguably one of the best buckings.

Flat hop nub gives incredible range next to the R-hop.

Gate Titan will fix the whole overspin issue (only very slighty overspinning).

Lonex air nozzle will solve the compression problems as Krytacs have a slight air seal issue with the nozzle as the nozzle has no o-ring. 

Gate Titan is a good shout.

ASG ultimate 30k is a better choice than the lonex A2 and similar price.

Prommy purple wont add anything the standard bucking is as good if not better. Had issues with recent batch of prommy buckings so stopped using them entirely as finding lonex is better for standard bucking and a lot cheaper.

Flat nub will do nothing unless you flat hop or r hop.

Stick with the standard krytac nozzle as I have had two come my way that had the nozzle replaced for ones with o'rings and both were having feeding issues due to the nozzle dragging. Krytac guns like most good guns have tight tolerances so the o'ring can have a negative effect and should only be used where tolerances are crap i.e G&G.