• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here

KWA Kriss Vector Owners Club

And another little gem from Charles at Airsoft Engenuity, rubber mag bases. No more breaking mags if you drop them 

yZcpdBA.jpg


p5dzxOx.jpg


 
Airsoft Engenuity’s carbon fibre nozzles are going great guns in my Vectors ?

 
So I recently got myself a KWA vector, thought I'd drop by and see if I can join the club and get the matching owners jackets. 

 
I'm currently trying to source a Kriss suppressor or an osprey one to put one the front. Also looking to HPA tap the mags. 

I noticed you had got spare recoil block (the bits the nozzle slide into.) Where did you source them from? 

 
Encore said:
I'm currently trying to source a Kriss suppressor or an osprey one to put one the front. Also looking to HPA tap the mags. 

I noticed you had got spare recoil block (the bits the nozzle slide into.) Where did you source them from? 
Click to expand...


Most of my spare parts are long gone, but they are available from impulse101.jp or kscpart.com

The KRISS thingy is a barrel shroud, not a suppressor, and takes some custom parts to fit

So, show us a picture of your beast then lol

 
Do you know if the vector needs specific how taps or will any Kwa gas valve tap work.

 
Encore said:
So I recently got myself a KWA vector, thought I'd drop by and see if I can join the club and get the matching owners jackets. 
Click to expand...
Welcome to the club (Warning it can get expensive :D  ). What mods does your gun have and what have you got planned? :)  

 
Photos to come! 

Not mods currently, going to machine some weights for replicate the haphaetus recoil kit. My vector came with all but the two that fit into the recoil block itself. Should be easy enough. 

Eventually I want to see if I can figure out away to hpa drive the vector without taping the mags. E.G find away to deliver air through the pistol grip instead. In theory that'd let me use AEG Kriss mags. But haven't don't any research into this yet. If the AEG mags aren't compatible then there it no point. 

I'd like to get a drum mag eventually and either a Kriss suppressor or a osprey suppressor. Got a surefire to install but need a new remote switch for it first. 

I'm also planning to buy a spate body for it at somepoint so I can skirmish it with one body and have another for Gucci Kriss pictures and incase the current body breaks etc. 

 
Encore said:
Photos to come! 

Not mods currently, going to machine some weights for replicate the haphaetus recoil kit. My vector came with all but the two that fit into the recoil block itself. Should be easy enough. 

Eventually I want to see if I can figure out away to hpa drive the vector without taping the mags. E.G find away to deliver air through the pistol grip instead. In theory that'd let me use AEG Kriss mags. But haven't don't any research into this yet. If the AEG mags aren't compatible then there it no point. 

I'd like to get a drum mag eventually and either a Kriss suppressor or a osprey suppressor. Got a surefire to install but need a new remote switch for it first. 

I'm also planning to buy a spate body for it at somepoint so I can skirmish it with one body and have another for Gucci Kriss pictures and incase the current body breaks etc. 
Click to expand...


Nice idea for non-tapped mags, but it will take a lot of work, as there is no room in the KWA Vector interior for what you want to do.

I can envisage cutting the top from a gbb mag, and fitting it to a Krytac mag, but you will still need to route the HPA through the mag, or through a double mag at the side I think. Why don’t you want to tap the KWA mags?

I have a couple of spare bodies, drop me a PM bud.

Weights are available here

https://www.airsoftworld.net/ra-tech-kriss-vector-hard-kick-set.html

I didn’t say, but my Vector above is in RS KRISS cases in case you hadn’t guessed ?

 
rocketdogbert said:
Nice idea for non-tapped mags, but it will take a lot of work, as there is no room in the KWA Vector interior for what you want to do.

I can envisage cutting the top from a gbb mag, and fitting it to a Krytac mag, but you will still need to route the HPA through the mag, or through a double mag at the side I think. Why don’t you want to tap the KWA mags?

I have a couple of spare bodies, drop me a PM bud.

Weights are available here

https://www.airsoftworld.net/ra-tech-kriss-vector-hard-kick-set.html

I didn’t say, but my Vector above is in RS KRISS cases in case you hadn’t guessed ?
Click to expand...
It's not that I don't want to hpa tap the mags, it just how scarce they are. Figured if I could supply air another way they I could completely switch to aeg mags. 

 
Encore said:
It's not that I don't want to hpa tap the mags, it just how scarce they are. Figured if I could supply air another way they I could completely switch to aeg mags. 
Click to expand...


Mags aren’t scarce, you can still buy new from multiple sources, including Rainbow8 and KWA-USA ?

 
rocketdogbert said:
Mags aren’t scarce, you can still buy new from multiple sources, including Rainbow8 and KWA-USA ?
Click to expand...
Ohhh, this is news to me! Right need to start saving and order a few. I'd like to murder box a mag some day (feed from an auto feed drug mag or something) 

 
Encore said:
Ohhh, this is news to me! Right need to start saving and order a few. I'd like to murder box a mag some day (feed from an auto feed drug mag or something) 
Click to expand...
Search the forum for Remote drum mag, and look for @rocketdogbert‘s post..... he made one a hell of a lot better than anything you can buy.

 
Evening gents

Hope everyone is well.

Having played with my Krytac for a number of times now at a few outdoor airsoft events including cqb, I have to say that I frickin love it.  So much so that I have just added a battery drum mag to help me continuously waste the opposition without pausing for breath.  Next I want to look at improving the range and accuracy but not sure of how best to achieve this - tinker with the stock items and or upgrade innards.

to help me avoid wasting money and time getting this right, can I ask you reliable lot for some input when you have a mo.

Thanks

Ken

 
You must log in or register to reply here.

Similar threads

Khyber
'Owners club' forums
Replies
4
Views
2K
Khyber
Khyber
C
Kwa Kriss Vector Parts - 3d Milling Operation
Replies
2
Views
941
Guest
G
Marksman1933
Advice Regarding My Kwa Kriss Vector
Replies
3
Views
630
hitmanNo2
H
A
Possible new site Northants area
Replies
11
Views
2K
AlphaBear
AlphaBear
P
A Call for Revolution: Supercapacitors in Airsoft
2
Replies
30
Views
3K
Sewdhull
S
Back
Top