-
photo_2026-01-02_10-43-01.webp -
photo_2026-01-02_10-43-02 (2).webp -
photo_2026-01-02_10-43-02 (3).webp -
photo_2026-01-02_10-43-02.webp -
photo_2026-01-02_11-20-46.webp -
photo_2026-01-02_10-43-01 (2).webp -
photo_2026-01-02_10-43-01 (3).webp
- Condition
- Used
- FPS
- 350
For sale one Vipertech XM177E2 with mags and spare bits.
Bought second hand from the first owner that bought it new 2021, presumably one of the last to have gotten surface anodizing as they stopped doing it later that year due to the cost and delays. I have got it fully bedded in, been used plenty having had in excess of at the least six thousand (2 bags of beebs) rounds through it. Has a 16mm nozzle with a Catgut/Explosive Enterprises 3D printed adjustable valve fitted and running to around 270-280fps with .3g beebs, weather and conditions depending. Always ran on ASG Ultrair or Coleman Propane; shooting BLS bio beebs. Anything else the feed lips chomp up and cause the nozzle to fail to fully close. Also fitted to the rifle are a Brownells carbine buffer, skinny handguards and retro A1 dust cover. Trigger spring is a VT lightweight version and the buffer spring is a lightweight/winter RA tech one which both help massively with efficiency. Im not sure if the XM177E2 flash eliminator that is fitted came with the rifle originally or not but it is a very lovely replica complete with markings and correct internal vents etc. The buttstock is aluminium and might be original but cannot confirm. It will come with a rubber pad fitted like in the pictures.
Bad bits are the pins are badly peened where I refitted the Front Sight Base to the E2 length barrel, not having a hydraulic press like factory fitting or a big enough hammer to do it. I could have cleaned them up a bit but to be honest it never really bothered me though as they are in tight and the FSB doesn't move. Also the front sling swivel has been removed.
The rifle will come with:
-8 x EB tech heavyweight 30 round magazines
-4 x EB tech c02 30 round magazines
-10 x Vipertech 20 round short mags
-Vipertech 10.5 inch XM177E1 barrel it originally came fitted with
-short style flash eliminator muzzle brake thing
-M16A1 birdcage muzzle brake new in packet
-VT recoil buffer (useless but there anyway)
-1 x 20 round pen loader
-3d printed caps for VFC mag conversion
-Guillotine Airsoft VFC magazine conversion valve knocker (Have not fitted because it runs very well with stock magazines but its there if you want to)
-2 x spare VT hop rubbers
-Original VT trigger spring
-Original VT recoil spring
£1600
Long story short, the complete package if you want the top quality airsoft, money can buy (without the hassle of getting it running correctly)
UK BUYERS: a UKARA or valid defence will be required for sale to go ahead. I don't make the rules.
I can ship worldwide if you want but shipping is gonna cost a lot, especially with insurance.
Thanks for looking.
Bought second hand from the first owner that bought it new 2021, presumably one of the last to have gotten surface anodizing as they stopped doing it later that year due to the cost and delays. I have got it fully bedded in, been used plenty having had in excess of at the least six thousand (2 bags of beebs) rounds through it. Has a 16mm nozzle with a Catgut/Explosive Enterprises 3D printed adjustable valve fitted and running to around 270-280fps with .3g beebs, weather and conditions depending. Always ran on ASG Ultrair or Coleman Propane; shooting BLS bio beebs. Anything else the feed lips chomp up and cause the nozzle to fail to fully close. Also fitted to the rifle are a Brownells carbine buffer, skinny handguards and retro A1 dust cover. Trigger spring is a VT lightweight version and the buffer spring is a lightweight/winter RA tech one which both help massively with efficiency. Im not sure if the XM177E2 flash eliminator that is fitted came with the rifle originally or not but it is a very lovely replica complete with markings and correct internal vents etc. The buttstock is aluminium and might be original but cannot confirm. It will come with a rubber pad fitted like in the pictures.
Bad bits are the pins are badly peened where I refitted the Front Sight Base to the E2 length barrel, not having a hydraulic press like factory fitting or a big enough hammer to do it. I could have cleaned them up a bit but to be honest it never really bothered me though as they are in tight and the FSB doesn't move. Also the front sling swivel has been removed.
The rifle will come with:
-8 x EB tech heavyweight 30 round magazines
-4 x EB tech c02 30 round magazines
-10 x Vipertech 20 round short mags
-Vipertech 10.5 inch XM177E1 barrel it originally came fitted with
-short style flash eliminator muzzle brake thing
-M16A1 birdcage muzzle brake new in packet
-VT recoil buffer (useless but there anyway)
-1 x 20 round pen loader
-3d printed caps for VFC mag conversion
-Guillotine Airsoft VFC magazine conversion valve knocker (Have not fitted because it runs very well with stock magazines but its there if you want to)
-2 x spare VT hop rubbers
-Original VT trigger spring
-Original VT recoil spring
£1600
Long story short, the complete package if you want the top quality airsoft, money can buy (without the hassle of getting it running correctly)
UK BUYERS: a UKARA or valid defence will be required for sale to go ahead. I don't make the rules.
I can ship worldwide if you want but shipping is gonna cost a lot, especially with insurance.
Thanks for looking.
