-
20251210_144308.webp -
20251210_144320.webp -
20251210_144328.webp -
20251210_144334.webp -
20251210_144412.webp -
20251210_144418.webp -
20251210_144425.webp
- Condition
- Used
- FPS
- 350
Includes the Type 89 and no mag
Laylax AEG Keymod Handguard
Flamingo bucking
Crimson NPAS (longer grub screw fitting to work with the T89 nozzle)
Fully working including the 3 round burst (skirmished last Sunday) and gets decent range on .32s - currently set to 1.14j
Someone had the bright idea to install the AEG spec Laylax Keymod Handugard by (badly) JB welding the receiver to the top rail and then not sand it smooth or do much to make it presentable. It does still come apart, so the hop parts are still accessible luckily. But the front end is extremely rough, I've done some touching up with Birchwood Alu black to remove impacts/scratches on the receiver but the JB weld under the top rail and most of the outer barrel section are very rough.
£250 Posted via PF48
Bought under the influence of an immense amount of cheese.
Laylax AEG Keymod Handguard
Flamingo bucking
Crimson NPAS (longer grub screw fitting to work with the T89 nozzle)
Fully working including the 3 round burst (skirmished last Sunday) and gets decent range on .32s - currently set to 1.14j
Someone had the bright idea to install the AEG spec Laylax Keymod Handugard by (badly) JB welding the receiver to the top rail and then not sand it smooth or do much to make it presentable. It does still come apart, so the hop parts are still accessible luckily. But the front end is extremely rough, I've done some touching up with Birchwood Alu black to remove impacts/scratches on the receiver but the JB weld under the top rail and most of the outer barrel section are very rough.
£250 Posted via PF48
Bought under the influence of an immense amount of cheese.
