- Condition
- As New
- FPS
- 320
JG T3-K3 G3A3 with Folding Stock
- Freshly serviced and upgraded for sale
Upgrades:
Perun AB++ mosfet (Set to: Safe/Semi/3rd burst)
Maple Leaf Macaron 60 rubber + XT Omega nub
Taktak top rail (extended version)
Comes as standard with:
Original box and accessories
500rd high cap, with winder
Foregrip, with battery storage compartment
Will also include:
Original motor, hop rubber & nub
AB++ mosfet programming card
FPS: 315-320
(hop set for .25g, tested on ASG Blaster .25g, with 7.4v lipo)
Recommended BB weight:
.25g / .28g
Recommended battery type:
9.9v LiFe (Tested on 1000mah 20C 8Wh)
11.1v lipo (Tested on1300mah 25c 12Wh)
- Will also work with 7.4v, however has ocassional double-tap on semi with the 7.4v tester lipo I have (2200mah 20c 16Wh).
Doesn't do this when tested with my 9.9v LiFe and 11.1v LiPo
Gun was bought in near-mint/as new condition, with only minor scuffing to the bottom rail by the opening for the connector.
Original motor replaced with Cyma motor, just because it cycled nicer
Fire-select bar has been permanently fixed in on the selector-side.
Can still be unscrewed cap-side as standard, and the rest of the selector can be disassembled as normal, if needed.
(Will update ad with full video link once it's edited and uploaded)
£180 Collected
£195 Posted
Sale preferred, however, may entertain swaps or part-ex
Must be within reasonable meetup distance for swaps/part-ex, of course
Any questions, feel free to ask
- Freshly serviced and upgraded for sale
Upgrades:
Perun AB++ mosfet (Set to: Safe/Semi/3rd burst)
Maple Leaf Macaron 60 rubber + XT Omega nub
Taktak top rail (extended version)
Comes as standard with:
Original box and accessories
500rd high cap, with winder
Foregrip, with battery storage compartment
Will also include:
Original motor, hop rubber & nub
AB++ mosfet programming card
FPS: 315-320
(hop set for .25g, tested on ASG Blaster .25g, with 7.4v lipo)
Recommended BB weight:
.25g / .28g
Recommended battery type:
9.9v LiFe (Tested on 1000mah 20C 8Wh)
11.1v lipo (Tested on1300mah 25c 12Wh)
- Will also work with 7.4v, however has ocassional double-tap on semi with the 7.4v tester lipo I have (2200mah 20c 16Wh).
Doesn't do this when tested with my 9.9v LiFe and 11.1v LiPo
Gun was bought in near-mint/as new condition, with only minor scuffing to the bottom rail by the opening for the connector.
Original motor replaced with Cyma motor, just because it cycled nicer
Fire-select bar has been permanently fixed in on the selector-side.
Can still be unscrewed cap-side as standard, and the rest of the selector can be disassembled as normal, if needed.
(Will update ad with full video link once it's edited and uploaded)
£180 Collected
£195 Posted
Sale preferred, however, may entertain swaps or part-ex
Must be within reasonable meetup distance for swaps/part-ex, of course
Any questions, feel free to ask
