- Condition
- Used
Was extensively worked on to create a modern M4A1 build (done by Luke aka Neg Airsoft), but then never saw the skirmish field, and was disassembled. This set was Luke's recommendation, I just found a set I liked better because I'm a super picky bitch with ARs.
The surface finish is the closest to a real Colt M4 I've seen (having shot many real ARs), but with the bunny ears on the lower edge of the upper receiver you can't just slide the upper off like a normal AR AEG, you have to remove the pistol grip+motor. When this was built in to a full gun it was super solid as a result though, as both front and rear pins join the upper and lower, rather than just the front pin in 99% of AR AEGs out there.
Please examine all the pictures closely to see the condition. Stub for the buffer tube was cut so wiring could go through for a normal build with the wires going in to said tube to fit a LiPo (you'd have to use an M16 full stock if the cuts weren't there). Comes with the small ancillary parts depicted but nothing else. Far as I know there's nothing missing that's proprietary. Comes in original packaging. Be aware the trades aren't perfectly uniform in depth, if you're super in to your details; but they're present and correct as shown in the photos.
Original product listing:
I can't comment on which GBs will fit best, this is very much a listing for an advanced/experienced AR AEG builder or tinkerer.
Old pics, as I've been busy with work and just not managed to post listings for these small items until now. Lost all my old feedback, but you can see my eBay feedback if that helps at all:
The surface finish is the closest to a real Colt M4 I've seen (having shot many real ARs), but with the bunny ears on the lower edge of the upper receiver you can't just slide the upper off like a normal AR AEG, you have to remove the pistol grip+motor. When this was built in to a full gun it was super solid as a result though, as both front and rear pins join the upper and lower, rather than just the front pin in 99% of AR AEGs out there.
Please examine all the pictures closely to see the condition. Stub for the buffer tube was cut so wiring could go through for a normal build with the wires going in to said tube to fit a LiPo (you'd have to use an M16 full stock if the cuts weren't there). Comes with the small ancillary parts depicted but nothing else. Far as I know there's nothing missing that's proprietary. Comes in original packaging. Be aware the trades aren't perfectly uniform in depth, if you're super in to your details; but they're present and correct as shown in the photos.
Original product listing:
I can't comment on which GBs will fit best, this is very much a listing for an advanced/experienced AR AEG builder or tinkerer.
Old pics, as I've been busy with work and just not managed to post listings for these small items until now. Lost all my old feedback, but you can see my eBay feedback if that helps at all:
