Jump to content

hk px4


luke.08
This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and possibly forgotten) topic.

Recommended Posts

hey guys. i recently bought a hk px4 from a friend. tested it today and im baffled. the slide locks back when pulled back with an empty mag in. yet when firing and finishing a mag it wont lock back. any ideas.

 

cheers luke

Link to comment
Share on other sites

  • Supporters

It's the weather.

pulling it fully cycles it so the lock can go on.

firing it in the cold means it won't cycle the full way (especially after firing a full mag) and simply doesn't travel far enough back to lock out.

 

point the pistol at the floor and fire and it usually locks it.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...