Jump to content

Archived

This topic is now archived and is closed to further replies.

Harry Gorma

Movin battery

This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and probably forgotten) topic.

Recommended Posts

I have a CYMA AK47 (cm028)

And the battery is in the stock which is a full stock.

 

I want to know can you change the battery closer to the front and add in a rail to put stock on?

Share this post


Link to post
Share on other sites

Yes you can, but you will need to disasemble the gun to top wire it (under the top cover, but use a stick battery). Or you can leave it rear wired and feed it into the rear stock tube and use a nunchuck style battery

 

http://www.arniesairsoft.co.uk/forums/inde..._1#entry2495112

 

be aware though that you will need to remove the rear stock supports from the gun body, before drilling the holes in the rear (pluss again you need to completely disasemble the gun to do this) Also the body of the 028 is plastic so may require washers inside to support the stock)

Share this post


Link to post
Share on other sites

×
×
  • Create New...