Jump to content

ics m4 sportline piston assembly


ikarma70
This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and possibly forgotten) topic.

Recommended Posts

Hi all, got my m90 spring today and started to strip the piston assembly and some parts went flying.

 

the parts i have on the bench after some searching are: 2 split halves, 1 black plastic nozzle, spring guide and nut, 1 piston sleeve and piston, 1 small looped ended spring.

 

what does the small looped end spring connect to?

 

hope someone can help!

 

ATB

Andy

Link to comment
Share on other sites

It connects the tappet plate to the gearbox.

 

Have a look here:

 

 

Thanks bud, all sorted out and the gun shoots much much smoother, less aggressive and feels like it has a higher rate of fire with the M90 spring in.

 

Not chrono'd it yet but it is a vast improvement.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...