Jump to content

The 'What have you just bought' Thread


Cameron364

Recommended Posts

  • Supporters

For my tm akm 

BBF hop arm

DyTac/Arron Smith AK Master mount repro

Repro PK-A (I struggled to find one these days, ak optics are a bit limited imho)

 

for my tm mk18

BJTAC G style steel trigger

Link to comment
Share on other sites

17 minutes ago, JimFromHorsham said:

Full hand cannon / taser looking upgrade for the Maxim9 in the form of the tracer unit & baffle extensions , ChinaRMR & fakey +2 mag extension .

 

295389D0-8862-48C1-BE6B-C5FCDC0CC01C.thumb.jpeg.e8972117b1f2afea287dccd97dbd458b.jpeg

 

323C2A38-F09B-4E5F-8F3B-B8A5901EDF18.thumb.jpeg.1d2a86188e7aadc39a97c4227f8bddff.jpeg

 

57985536-A3D8-4FDF-BE15-8AB3B4101322.thumb.jpeg.715cea7b747dfd045f5f09b2c833051f.jpeg

You have to shout 'I am the law!' each time that you draw it.  

Link to comment
Share on other sites

16 minutes ago, Tactical Pith Helmet said:

You have to shout 'I am the law!' each time that you draw it.  


more like “I’m a middle aged bore who got that joke far too quickly” 

 

not from the films either 😂

Link to comment
Share on other sites

On 20/01/2023 at 21:39, Khyber said:

Good stuff. I will take the plunge with them I reckon. I did see on a review that they take some wearing in. And also new ones the timer is a little premature but settles to stated time after a little use. Good thing is as they are timed you dont need to lob them, a good low through or almost roll is sufficient for room clearing. Where did you buy them from? I noticed on the official website they are 85 I think but of you buy 2 they are a little over 60 each.

 

Fifewargames - they're out of stock on the official site and just about everywhere else when I was looking.

 

Edit: As of 1450 today Fifewargames are also out of stock.

 

Edit2: As of 24/1/23 they're back in stock, black only.

Edited by MrTea
Link to comment
Share on other sites

While I wait for my new rig to arrive:

 

- G&G ARP-9 handguard for the AAP (pics will follow);

- Specna polymer upper receiver;

- Random 128x32mm suppressor, building a lighter, more modern upper for my 933 specifically for tournaments (pics will follow)

Link to comment
Share on other sites

I've just bought a few keymod to picatinny rails, and some lipo alarms. Nothing too exciting. But I've just found a relatively local indoor CQB site that runs regularly weekday evening games that I hope will give me the chance to go more often, and so I felt like I needed to invest in a flashlight attachment. Which meant I needed to bite the bullet on the rails, as my keymod setup makes it a little restrictive when looking at attachments. 

Link to comment
Share on other sites

Been a while since I last posted here due to work/Covid/kids etc.

 

just recently getting back into it, and have came back with a bang! Added a SAI Blu (again) an EMG Combat Master and a KWA Mod 1 in December…..then TM released the NGRS SD6 and well I kinda had to pre-order that too! ETA is mid-feb, fingers cross it all goes smoothly!

DE176937-C8A5-43C4-B12D-73AB73E72B65.jpeg

Link to comment
Share on other sites

Picked up a Multicam JPC 1.0 and some Lindnerhof pouch replicas off the forum, working towards a 2014 KSK kit; first time i've been pretty happy with my PC setup :D 

 

UGaBqneE0ohHQmGeBNx0no_Pp3MgxLjJzfsY31JXz7otV_OAfIsY5LLkE5LK5TZ5JSLdtcIkZb44IB1USyuLbTVruZyOMyCYfcUHuSsdTj3MpqKugEDjPpofPXg6e7mfsqhVzUTYB0jX-SYljTU09iqY_4LZPJCxb6QxDg-5m4K3GFhXSqylmfb5pEh3IDHujPGn81BL0FImO-KA37fxGPuZgxYgvCWeWrs3NRcdckg04Mubttf3vYslHkofPloA8eWHDLgweffQ0z7h3xkl0oKML8v0fbYzhocGq9T1idIYwI4WF65l3aOJ0xzQZgMQk5hWJF8r7F8ThS2XyQk4GMSO75n7npY8rH5Zxja9JOWC3_qro6EC1eN77xvc2Z17ebHwEBZqcHT1RNjgUzzxo7i1DPgS5kwneCCZs1nUCuAt8KOGM82MVaDOJ55CBe9Xg4KJtjhljIMxg85qQO75iLS18ajTrDrMK4Lv9Mj5Ga6Ttx86H46b-kJet-pnS4hxrtKHlB5PaspTCQ-ya1zQBvz990OJ5bIimqnYJcYo_0y2ex0tkLVF3642WG8Lq5ica_1Aolai01wcn_qnEvmtaMoqVxh40lx8C5Hb4c-8wmaU4fc8ZxdpKT2KSrwxkdlEYO2eOGBeVJ9o7V8ABfcsT10NqZncHWWy5I4_x-ITLmHt4_Flla45xM_7EVCnWn5da-Q8aCDxWXbFT2jF0iFo2Is_nQA_RuqKzxaVnUy6-RfwRdDS-LexCxXY8OroHd3U_vteSF7Q-febagYmekdrgSfbRTM8wc9MFeLYrc3fu8ys6sNsT9jHGdl0YkLZMfXGyuyqeqCxCjv2kvzzPeU41MkNeFy-yzKXEIxmHGprBZVmyxtWp0QjVBRokEaTSOMHPDK9t6ClFynkK_eYuIU1NX_V2CP4LbY0WFrhQr_eXD7NR_5Pxg=w977-h1297-no?authuser=0

Link to comment
Share on other sites

Two new guns in separate purchases on the same page in this thread?
Don't mind if I do, sir!

I think I'm really getting the hang of this airsoft lark    ("Buy more guns.  Don't even need to shoot them, just keep buying...")
 

1722225995_GGG36Bf4.thumb.jpg.cc3ab792bdbc735c607afbcfe5c16d6e.jpg

 

It's the G&G GEC36 from Action Hobbies boneyard, so a decent price.  Two mid cap mags.

Blimey this gun is built solidly!  It's about the same weight as my HK416.  Really nice polymer (plus metal in the right places).  Not the faintest hint of a creak from it, even the folding stock doesn't budge a millimetre.

I think I could beat a stegosaurus to the death with it!    Which is handy, as it's still Tamiya wired so I've not fired it yet.   No dino-hunting for me, until the soldering iron can be found...

 

 

Edit: Deans fitted (took me longer to find the soldering iron than anything else), the guns a peach.   340fps on 0.20s, very nice 18rps on an 11.1v
I'll have to fit a MOSFET on it to protect the trigger contacts as this another gun I don't want to open the gearbox of, in case I spoil it somehow.

Edited by RostokMcSpoons
New pic, Battlefield 4 loadout: Coyote sight + Stubby grip
Link to comment
Share on other sites

1 hour ago, JustMark said:

Not as exciting as a new pew (or two! @RostokMcSpoons) but inspired by discussion elsewhere here I got fancy new gloves

 

20230203_180236.jpg

Where from,how much and are they available in black or mcam?

Haha so many questions,so little time. 😉

 

Regards 

Link to comment
Share on other sites

1 hour ago, Shamal said:

Where from,how much and are they available in black or mcam?

Haha so many questions,so little time. 😉

 

Regards 

I'm afraid I made old Jeff a bit richer by using Amazon.  I think I was spoiled for choice due to my child sized hands, less oddly tiny appendaged folks might struggle. 

Gotta get and play with all this gear I keep buying now! 😄

Link to comment
Share on other sites

15 hours ago, Shamal said:

Where from,how much and are they available in black or mcam?

Haha so many questions,so little time. 😉

 

Regards 

I got mine in black from amazon a year ago. In Medium size. IIRC multicam is also available.

Link to comment
Share on other sites

20 hours ago, Shamal said:

Where from,how much and are they available in black or mcam?

Haha so many questions,so little time. 😉

 

Regards 

Loads of patterns available. I have black, OD and tan, and got my lad some in woodland. Love them.

Link to comment
Share on other sites

A big old pile of bits that have gradually been accumulating ready for a fresh MWS project. RIF itself should be here tomorrow, then just waiting on some bits from HK to arrive before cracking into the build.

 

329539922_745748343413051_6984420338300317892_n.thumb.jpg.45f2ecbaf0a77d9166ac53bd19a6327d.jpg

 

External

5x Marui MWS mags

6x FDE Magpuls (tabs chopped)

PTS Unity Riser

Holy Warrior EXPS-3

BCM Gunfighter Stock

BCM Gunfighter Mod 3 Grip

BCM Gunfighter Vert Grip (M-lok)

Ferro Concepts Pic 45 degree QD Mount

Magpul Trigger Guard

Magpul B.A.D Lever

Genuine Surefire Scout on an Arisaka Mount (will likely swap for an Inline) & repro Mod button

WADSN NGAL

Acetech AT2000R to go in an AA CGS Helion QD Ti replica

PTS Radian Charging Handle

 

Internal

BavTac Titanium ZET plate

SixG Super Nub

SixG HSB

NPAS

Modify Tan (not entirely sure if this will actually go in or not, mixed experience so far)

 

 

Edited by alxndrhll
Link to comment
Share on other sites

54 minutes ago, alxndrhll said:

A big old pile of bits that have gradually been accumulating ready for a fresh MWS project. RIF itself should be here tomorrow, then just waiting on some bits from HK to arrive before cracking into the build.

 

329539922_745748343413051_6984420338300317892_n.thumb.jpg.45f2ecbaf0a77d9166ac53bd19a6327d.jpg

Huhh! I would at least had the impatience to put those magpuls on….

Link to comment
Share on other sites

3 hours ago, alxndrhll said:

A big old pile of bits that have gradually been accumulating ready for a fresh MWS project. 

 

 

Looking forward to seeing this one 

Link to comment
Share on other sites

Fo my son birthday I got some extra mags for his TM hicapa so he can now run a pistol only build.

He will get HPA setup soon as well.

 

The P90 pouch is to store a gas can as it's the perfect size, I have use one for years.

The holster goin back as it's retention is so crap.

IMG_20230204_132544973.jpg

Link to comment
Share on other sites

39 minutes ago, GothicGhost said:

Fo my son birthday I got some extra mags for his TM hicapa so he can now run a pistol only build.

He will get HPA setup soon as well.

 

The P90 pouch is to store a gas can as it's the perfect size, I have use one for years.

The holster goin back as it's retention is so crap.

 


P90 pouch as a gas can holder?  I like that, I like that a lot!  Just made an order from Patrolbase, I'll see if they've got one I can add in.   (Edit: out of stock, damnit)
It'll save me buying mini-cans I can fit in my existing pouches

Edit:  Is the pouch this double P90 one?
https://www.amazon.co.uk/Viper-P90-Mag-Pouch-V-Cam/dp/B00WX21DFO/ref=sr_1_1
That seems to have an internal divider - do you just cut it out, or will the can fit regardless?

Edited by RostokMcSpoons
Link to comment
Share on other sites

Barrel arrived after nearly 2 months of the most stupid airsoft retailer service I’ve experienced, to top it off the barrel was delivered IN A BAG, seriously what is wrong with people! luckily it’s straight but it has a dent in the end, thanks Airsoft Direct, won’t be buying there again.

 

36275805-8DE2-448A-A787-D62F8BE7E1DE.jpeg

D5C74D86-26C0-4E6D-8EC5-37A814A2406D.jpeg

Link to comment
Share on other sites

MP9 is now complete, but now I need to find some foam that will fit in this because it's a very thicc boi. Anyone know a good way to fill this with foam?

 

image.thumb.jpeg.06bd2a89ae220db43530f42c5399b75d.jpeg

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...