Jump to content

The 'What have you just bought' Thread


Cameron364

Recommended Posts

Not much this time.

Just an M-Lok vertical fore grip for the arp.. And ordered a 2 points sling for the sniper :)

Link to comment
Share on other sites

8 minutes ago, SgtTalbert said:

 

Yep - so far I really rate it. Its getting its first outing on Saturday.

I especially rate the tactical cat. ^.^ I gotta get one.


How mcuha re they?

I just picked up an EBB G63E

Link to comment
Share on other sites

1 minute ago, Vulpiness said:

I especially rate the tactical cat. ^.^ I gotta get one.


How mcuha re they?

I just picked up an EBB G63E

 

Free, she was a rescue :)

Link to comment
Share on other sites

2 minutes ago, SgtTalbert said:

 

Free, she was a rescue :)

^.^  She's cute. But I meant the 5.11 and do thy come in green yet/ 

Link to comment
Share on other sites

3 minutes ago, Vulpiness said:

^.^  She's cute. But I meant the 5.11 and do thy come in green yet/ 

 

Ah sorry, no, not green yet, just black and tan.

 

They are currently £214 with free delivery at TacTree. Everywhere else is £283

Link to comment
Share on other sites

1 hour ago, Vulpiness said:

F-that then. 

What were you expecting? Lol

Link to comment
Share on other sites

Just now, Skara said:

What were you expecting? Lol

then to have green by now. 

Link to comment
Share on other sites

24 minutes ago, jcheeseright said:

 

What you gonna do for a lens protector? 

 

Short term nothing. I spoke to Paul at Scott's and it's been tested with a hot rifle and it didn't cause any damage (video on YouTube). 

 

Long term (IE: next month) I'll make a sac lense from my hero shark mesh. I've tested the mesh flat against the lense and there's no distortion / reduction in visibility. Just need to find a suitable butler cap or similar. 

Link to comment
Share on other sites

28 minutes ago, jcheeseright said:

 

What you gonna do for a lens protector? 

You can’t cover thermal with a lens as far as I’m aware with a poly lens. Apparently if you buy from Scotts they cover the lens for airsoft

 

edit:... beat me to it 

Link to comment
Share on other sites

11 minutes ago, Wo1f said:

You can’t cover thermal with a lens as far as I’m aware with a poly lens. Apparently if you buy from Scotts they cover the lens for airsoft

 

edit:... beat me to it 

 

They don't for the Breach. They do for the T20 I think it's called 

Link to comment
Share on other sites

10 TLSFX High Density Smoke

20 TLSFX Thermobaric Single Bangs

10 TLSFX Multi Bangs

20 4.5s Fuse Timed Tag Rounds

Evaq8 Self Heating Pasta and Meatballs

3D Printed Pistol Grip for a project

Cold/Wet Weather Gen 1 ECWCS Woodland Jacket

5.11 Large Kit Bag

 

 

 

 

 

18 hours ago, SgtTalbert said:

IMG_20190115_151825_HDR.jpg

 

 

This picture makes me sad on so many levels

Link to comment
Share on other sites

1 hour ago, clumpyedge said:

10 TLSFX High Density Smoke

20 TLSFX Thermobaric Single Bangs

10 TLSFX Multi Bangs

20 4.5s Fuse Timed Tag Rounds

Evaq8 Self Heating Pasta and Meatballs

3D Printed Pistol Grip for a project

Cold/Wet Weather Gen 1 ECWCS Woodland Jacket

 

 

 

 

 

 

 

This picture makes me sad on so many levels

It was just to show how large the rifle compartment is in terms of what you can fit. Having said that, they don't move due to the straps so I'd happily transport them like that.

Link to comment
Share on other sites

Just now, SgtTalbert said:

It was just to show how large the rifle compartment is in terms of what you can fit. Having said that, they don't move due to the straps so I'd happily transport them like that.

 

Just joking mate, you do things however you like :) my SOMS has multiple bags for each individual bit of equipment but I'm just a stickler for being overly organized. The 5.11 range bags all fit in snuggly with each other so its all nicely laid out. Bloody love my bag but wish id got the CAMS.

Link to comment
Share on other sites

  • Supporters

AND thanks to my ‘good friend’(git!) @FreeFrag.UK my latest moment of weakness has arrived ! 

A Snowolf (Jing Gong) AUG A1 para .

was running a rather fruity 356fps on .25’s So via the magic of its quick change spring system I lopped of 3.5 coils and it’s now running a more manageable 309fps ! One thing I did discover was the wires had the polarity the wrong way around ! So corrected THAT fault as well when sticking the deans on ! 

Also @Iceni it’s already been mod’ed ! Looks like your design is getting about ! Think you better pattern it mate ! 😉

40BBF197-DA74-469F-A7EA-230FF2DA52FE.jpeg

Link to comment
Share on other sites

Just a touch hot then lol! 1.5J!! that's what almost 400fps on a 0.2.

309 is almost a perfect cut.

Polarity been wrong on the wires is something I wasn't expecting! Was that on the motor or the connector? It just shows poor QC. It's basic things like this that china guns constantly get wrong and it's a shame because the product is essentially right.


Body looks perfect. So it came with the 3 position selector rather than the standard one. That's good for you, would have been nice if CA had managed to get hold of them as well for @FreeFrag.UK

But he spent twice as much and pretty much only got a mosfet and a fancy plate on the gearbox divide, so I still stand by the JG/APS budget guns been the correct path into the AUG.

You still got the QC gearbox, Wasn't expecting that. Does it have bearings as well then?



 

Link to comment
Share on other sites

Finally bit the bullet and ordered this, condor exo plate carrier gen 2 l/xl

ive been eyeing it up for ages but because I’m tall (6.3) and big (fat 20st 6lb at my last weigh in, I’m on a diet 😂) I’ve been putting it off but it actually fits nicely with room to go bigger and smaller on the cummerbund 👍👍

 

also picked up some wall hooks so I can get my guns on the wall in my cupboard 

233EC9C0-560D-4E5E-93B5-7D435AF65CB2.jpeg

Link to comment
Share on other sites

  • Supporters
4 hours ago, Iceni said:

Just a touch hot then lol! 1.5J!! that's what almost 400fps on a 0.2.

309 is almost a perfect cut.

Polarity been wrong on the wires is something I wasn't expecting! Was that on the motor or the connector? It just shows poor QC. It's basic things like this that china guns constantly get wrong and it's a shame because the product is essentially right.


Body looks perfect. So it came with the 3 position selector rather than the standard one. That's good for you, would have been nice if CA had managed to get hold of them as well for @FreeFrag.UK

But he spent twice as much and pretty much only got a mosfet and a fancy plate on the gearbox divide, so I still stand by the JG/APS budget guns been the correct path into the AUG.

You still got the QC gearbox, Wasn't expecting that. Does it have bearings as well then?

To be honest I’ve always rated JG as one of the best Chinese clone’ers , the wire cross over was at the connector end , so me thinks Friday afternoon Wang pushed the pins in the wrong way round but then thought to him self “fluck it ! No one know it was me !” Problem was the wires aren’t coloured black and red they both have clear sleeves on them .

AND it had a posh gearbox plate as well ! 😱

but not sure about the bearings .😁

Will say though it does feel bombproof really good and solid .

i have ordered a folding front grip for it , it feels ok with the ris block and vert grip but I just prefer the look of the original folding foregrip  , and for me it really is all about the look no matter how good a gatt performs if I don’t like the look of it I just won’t have it (the Evo is a perfect example , by all accounts there a cracking gun but I detest the look of them so I’d never have one) but everyone’s got there own ‘quirks’ when it comes to there kit ? And kit wise I shall be dusting off my Aussie DPU/DPDU and running around screaming “you awake Sheila ?” and “quick ! shove another shrimp on the fricking barbie ya drongo !” 🤣🤣🤣🤣

 

2 hours ago, L3wisD said:

You guys giving me AUG envy again 😕

Yooooouuuuuurrrrrr welcome ! 😈

😂👍

Link to comment
Share on other sites

I expect just bought (and fitted) the WETech upgrade lower frame kit and a compensator to my WE G18C. 

 

Before:

IMG_20190118_173702.thumb.jpg.19fda12913429889c84d145364847b42.jpg

 

After:

IMG_20190118_205747.thumb.jpg.7bcaa60652c6d16754d1702602603fe1.jpg

 

IMG_20190118_205430.thumb.jpg.7dca2b2fdd69dc0aebeccfd62100463d.jpg

 

IMG_20190118_205407.thumb.jpg.43adb55188f000098b0453fcdae2292a.jpg

 

Certainly not to everyone's taste, I know, but I absolutely love it. 😁

Link to comment
Share on other sites

So , 

In my little haul from the airsoft shops in Brno Czech Republic 

I have bought stuff that I still haven’t acquired yet

 

Dump pouch

Cap

2 x mag bases for my G17

Face protection

pouch for  Baofeng

 

Barely spent £30 , probably the same as at home , but it’s holiday money 😉👍

 

33E29FC9-06DD-4874-976E-0BE6D3DAA283.jpeg

1A75704B-357C-4F42-A8B7-714B8E50D5CB.jpeg

 

 

 

Edited by Enid_Puceflange
Link to comment
Share on other sites

4 hours ago, Enid_Puceflange said:

So , 

In my little haul from the airsoft shops in Brno Czech Republic 

I have bought stuff that I still haven’t acquired yet

 

Dump pouch

Cap

2 x mag bases for my G17

Face protection

pouch for  Baofeng

 

Barely spent £30 , probably the same as at home , but it’s holiday money 😉👍

 

33E29FC9-06DD-4874-976E-0BE6D3DAA283.jpeg

1A75704B-357C-4F42-A8B7-714B8E50D5CB.jpeg

4F64EB88-9716-4B73-B575-16201FFD365B.jpeg

42A38C06-5F33-45CC-912D-09759EB9697C.jpeg

BC5C387A-7C38-4B60-9A89-7D709F4F4326.jpeg

Wouldn't bother with that style of dump pouch. They're easy to quickly drop a mag into but you need to take it out before you move or it'll bounce straight back out. 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...