Jump to content

Vfc mp7 navy gbb


Tech
 Share

This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and possibly forgotten) topic.

Recommended Posts

Anyone know if it's in stock anywhere? Or someone selling one? Been wanting one for a while and I'm finally ready to pull the trigger and I can't find one for the life of me. Any help is massively appreciated.

Link to comment
Share on other sites

When I bought my mp7 wgcshop had navy version in stock but just checked and it's gone. Patrolbase sells the A1 version if you can't wait. 😄

Link to comment
Share on other sites

10 hours ago, Scott doogan said:

6A430A08-A452-40B0-B7BD-1213AE3FA255.png

90E33DD2-1140-4D19-BC04-0724A956600C.png

DD448008-4BF3-491F-A138-D91C37F2B2FC.png

Looking for the navy version specifically. I was under the impression that apart from the foregrip it also has some issues rectified from the a1.

7 hours ago, Duff Beer said:

MLE Mart have the Navy rail, so you could get the standard MP7 and cut off the grip?  That’s what I did with mine.B677D0C0-4388-4F96-A2DC-550CFAD8C3C2.thumb.jpeg.dce2bdcd086b8d136e34545a8df3b028.jpeg

I thought the navy had some of the kinks from the a1 sorted. As well as the foregrip. If not I'm might just do that. Also don't suppose you know if there are small 20 round mags anywhere? I only see the bigger ones.

Link to comment
Share on other sites

image.thumb.jpeg.a2d7a9782bbbc944a4b5b5a49280d38f.jpegG36C rails fit the sides of the A1. Not had any issues with mine, it's a great little gun. Use it as a primary at the local woodland site on occasion.

Link to comment
Share on other sites

25 minutes ago, Tech said:

Looking for the navy version specifically. I was under the impression that apart from the foregrip it also has some issues rectified from the a1.

I thought the navy had some of the kinks from the a1 sorted. As well as the foregrip. If not I'm might just do that. Also don't suppose you know if there are small 20 round mags anywhere? I only see the bigger ones.

The version 2 of either model were the same internally as far as I’m aware.  The differences were the folding foregrip and the inclusion of the side rails in the box. My A1 is a version 2, and apart from the stock locking catch failing (a common fault, order the Crusader steel version immediately) it’s been good as gold.

The foregrip came off mine really easily with a junior hacksaw (remove the folding section first my taking out the centre pin), and then as said above the G36 rails fit perfectly.  If you want to go a bit niche you can put MLOK rails on instead of RIS.  My OCD couldn’t handle a mix and match between the side rails and top rail though.

 

Unfortunately there aren’t any 20/30 round mags for it.  It’s a shame as running it super clean with 20 round mags would make it the perfect sniper backup (and give slightly more choice on the mag pouches as well).  If anyone does find any let me know!

Edited by Duff Beer
Talking about mags
Link to comment
Share on other sites

13 minutes ago, Duff Beer said:

The version 2 of either model were the same internally as far as I’m aware.  The differences were the folding foregrip and the inclusion of the side rails in the box. My A1 is a version 2, and apart from the stock locking catch failing (a common fault, order the Crusader steel version immediately) it’s been good as gold.

The foregrip came off mine really easily with a junior hacksaw (remove the folding section first my taking out the centre pin), and then as said above the G36 rails fit perfectly.  If you want to go a bit niche you can put MLOK rails on instead of RIS.  My OCD couldn’t handle a mix and match between the side rails and top rail though.

 

Unfortunately there aren’t any 20/30 round mags for it.  It’s a shame as running it super clean with 20 round mags would make it the perfect sniper backup (and give slightly more choice on the mag pouches as well).  If anyone does find any let me know!

Cheers mate, I'll probably do that then. Shame about the mags. 

Link to comment
Share on other sites

52 minutes ago, Tech said:

Cheers mate, I'll probably do that then. Shame about the mags. 

No worries.  Patrol Base have the A1 at £289 at the moment (check it’s the version 2 but I guess it is as mine was from 2019).

 

MLE Mart is where I got my rail, but I had to contact them directly for a shipping quote for (apparent) PayPal reasons.  They’ve always been good for me, but if you’d rather order direct from VFC you can do.  
 

I can’t stress this enough though, get the steel stock catch as the standard one will fail.  It’s a £10-15 part and will give you piece of mind.  
 

Stock Catch https://www.mlemart.com/products/crusader-steel-stock-button-and-claw-stock-locker-for-umarex-vfc-mp7a1-gbb

 

A touch of luxury https://www.mlemart.com/products/wii-tech-mp7-umarex-vfc-rubber-stock-pad


The Navy Rail https://www.mlemart.com/products/vfc-mp7a1-navy-gbb-lower-rail-handguard-03-2

 

Side Rails (MLOK) https://www.mlemart.com/products/revanchist-v2-m-lok-rail-set-for-for-umarex-vfc-marui-kwa-mp7

 

Side Rails RIS https://www.mlemart.com/products/vfc-mp7-gbb-side-rail-set

 

I have no ties to MLE other than they stock all the bits and I’ve ordered from them before.

 

 

Link to comment
Share on other sites

29 minutes ago, Duff Beer said:

No worries.  Patrol Base have the A1 at £289 at the moment (check it’s the version 2 but I guess it is as mine was from 2019).

 

MLE Mart is where I got my rail, but I had to contact them directly for a shipping quote for (apparent) PayPal reasons.  They’ve always been good for me, but if you’d rather order direct from VFC you can do.  
 

I can’t stress this enough though, get the steel stock catch as the standard one will fail.  It’s a £10-15 part and will give you piece of mind.  
 

Stock Catch https://www.mlemart.com/products/crusader-steel-stock-button-and-claw-stock-locker-for-umarex-vfc-mp7a1-gbb

 

A touch of luxury https://www.mlemart.com/products/wii-tech-mp7-umarex-vfc-rubber-stock-pad


The Navy Rail https://www.mlemart.com/products/vfc-mp7a1-navy-gbb-lower-rail-handguard-03-2

 

Side Rails (MLOK) https://www.mlemart.com/products/revanchist-v2-m-lok-rail-set-for-for-umarex-vfc-marui-kwa-mp7

 

Side Rails RIS https://www.mlemart.com/products/vfc-mp7-gbb-side-rail-set

 

I have no ties to MLE other than they stock all the bits and I’ve ordered from them before.

 

 

Ah thanks so much dude. Saved me the legwork. The mle Paypal thing is a bit weird but hey if you get it I can't complain. Thanks for all your help.

Link to comment
Share on other sites

2 hours ago, Nick G said:

image.thumb.jpeg.a2d7a9782bbbc944a4b5b5a49280d38f.jpegG36C rails fit the sides of the A1. Not had any issues with mine, it's a great little gun. Use it as a primary at the local woodland site on occasion.

 

What kind of supressor is that? Cheers.

Link to comment
Share on other sites

1 hour ago, Krisz said:

 

What kind of supressor is that? Cheers.

I seem to recall it came from Patrol base, I'll see if I've still got details. Used an adapter on place of the standard flash hider to bring the threads up to the usual 14mm - 

https://www.patrolbase.co.uk/metal-100x35mm-dummy-sound-suppressor

Think it's that one, but showing out of stock at the mo

https://www.patrolbase.co.uk/lees-precision-engineering-cnc-machined-14mm-ccw-thread-adapter-for-umarex-vfc-and-ksc-kwa-mp7

And the adapter

Link to comment
Share on other sites

This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and possibly forgotten) topic.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...