Jump to content

Need Help With My TM / Guarder Sig P226 (Navy)


Tabitha
 Share

This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and possibly forgotten) topic.

Recommended Posts

Good morning.

 

I'm hoping that someone will know / see something I haven't as to my trigger reset issue. (I've attached two videos and a photo to aid in illustrating the issue).

 

Put plainly, the trigger doesn't reset / go back to its fully forward, reset position after it is pulled.

 

I've taken my standard, factory basic, TM P226 gas and used it as my project piece (I'm unwell and part of my treatment includes keeping sane using specialised projects).

 

I've basically created a specialised model of the Sig P226, the Naval Spec Ops m odel.

 

I've had her apart and gone over everything with a careful eyen

Good morning.

 

I'm hoping that someone will know / see something I haven't as to my trigger reset issue. (I've attached two videos and a photo to aid in illustrating the issue).

 

Put plainly, the trigger doesn't reset / go back to its fully forward, reset position after it is pulled.

 

I've taken my standard, factory basic, TM P226 gas and used it as my project piece (I'm unwell and part of my treatment includes keeping sane using specialised projects).

 

I've basically created a specialised model o,f the P226, namely the Naval model, the Sig P226 (NAVY).

 

I've had her apart and rebuilt her several times and this issue with the sluggish, non fully resetting tv.

 

Her baby 

 

20210402_183555.jpg

Link to comment
Share on other sites

19 minutes ago, Tabitha said:

Good morning.

 

I'm hoping that someone will know / see something I haven't as to my trigger reset issue. (I've attached two videos and a photo to aid in illustrating the issue).

 

Put plainly, the trigger doesn't reset / go back to its fully forward, reset position after it is pulled.

 

I've taken my standard, factory basic, TM P226 gas and used it as my project piece (I'm unwell and part of my treatment includes keeping sane using specialised projects).

 

I've basically created a specialised model of the Sig P226, the Naval Spec Ops m odel.

 

I've had her apart and gone over everything with a careful eyen

Good morning.

 

I'm hoping that someone will know / see something I haven't as to my trigger reset issue. (I've attached two videos and a photo to aid in illustrating the issue).

 

Put plainly, the trigger doesn't reset / go back to its fully forward, reset position after it is pulled.

 

I've taken my standard, factory basic, TM P226 gas and used it as my project piece (I'm unwell and part of my treatment includes keeping sane using specialised projects).

 

I've basically created a specialised model o,f the P226, namely the Naval model, the Sig P226 (NAVY).

 

I've had her apart and rebuilt her several times and this issue with the sluggish, non fully resetting tv.

 

Her baby 

 

20210402_183555.jpg

Hi @Tabitha

I'm not sure but guessing at maybe bit more lube(looks a bit dry) and perhaps look at the trigger return spring.

Someone will probably get back to you with a better solution. 

Good luck 👍

Regards 

Link to comment
Share on other sites

Does it make any difference if the mag is in?

 

Link to comment
Share on other sites

Sorry for the delay in replying.

Having the magazine in or out does not effect the reset sadly. 

I'll hit more than the obvious spots with lube and follow her movements carefully to see any pressure points where she might be catching / meeting resistance.

 

Thanks for the help. Will update once it's done. 😸

Link to comment
Share on other sites

1 hour ago, Tabitha said:

Sorry for the delay in replying.

Having the magazine in or out does not effect the reset sadly. 

I'll hit more than the obvious spots with lube and follow her movements carefully to see any pressure points where she might be catching / meeting resistance.

 

Thanks for the help. Will update once it's done. 😸

Yeah sorry can't pinpoint the problem.☹

Hopefully something simple 👍

Regards 

 

 

Link to comment
Share on other sites

I've put a new trigger spring in and double checked everything is as it should be . . . the reset sadly is still not kicking in like it should. If I use the decocker then the trigger resets nicely but when I depress the trigger on a cocked hammer it doesn't complete its reset. She's still a beautiful piece and I'm still pleased at how she's come together. I've finished tailoring the wood grips and they're now done. Sights are Nitrite and the only plastic pieces are the odd ones that have to be. For some reason I look at her and see / think Resident Evil 4 / Revelations / Leon S Kennedy. If it even exists, I am thinking a longer, extended magazine, a red / green dot sight in the guide rod . . 

 

Right now though, I think it's time for a coffee. 😄

Link to comment
Share on other sites

This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and possibly forgotten) topic.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...