Jump to content

We Glock Eu18


stubarber
 Share

This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and possibly forgotten) topic.

Recommended Posts

Hi, I need some help as my gun has stopped working after I dropped it.

 

I have taken it apart per the manual and checked that there are no broken bits and can't find any issues.

 

The slide pulls back as before but is a bit notchy.

 

Is there someone that can help or is it destined for the shop to be repaired.

Link to comment
Share on other sites

Hi pal, sorry that you’re having issues, can you send a few high res pictures of the inside of the pistol from different angles. Also send a couple with the slide attached, just want to see how it sits. 

 

Cheers 

Dan 

I’m thinking that the nozzle spring may be damaged/stuck thus catching when the slide is pulled to the rear 

Link to comment
Share on other sites

Your knocker lock looks damaged, it should be raised, certainly when the hammer is locked down

 

You don’t show the bbu in the slide, it’s more likely that is damaged, particularly as it’s a G18

Link to comment
Share on other sites

7 minutes ago, rocketdogbert said:

You’re knocker lock looks damaged, it should be raised, certainly when the hammer is locked down

 

You don’t show the bbu in the slide, it’s more likely that is damaged, particularly as it’s a G18

Sorry rocketdogbert, I am new to this.

 

Is the knocker lock the small catch on the left side of the hammer assembly?

 

Is this the photo you mean?

IMG_20200414_223436.jpg

IMG_20200414_223417.jpg

Link to comment
Share on other sites

18 minutes ago, stubarber said:

Is the knocker lock the small catch on the left side of the hammer assembly?


Yup, does it spring up when you lock the hammer down?

 

BBU is at the rear of the slide, does it look like there’s excessive wear?

Link to comment
Share on other sites

38 minutes ago, stubarber said:

No the lock metal bit only goes up and down if I turn it upside down.

 

The bbu seems ok to me.

I just taken it out and it missing the spring underneath it, would this stop it from firing?


It MIGHT. Put the spring back. Normally it run-away fires without the knocker lock, so you may have just lost the spring whilst re-assembling

 

 

A83CD2E5-429E-4F3F-A867-680FD653070F.jpeg

Link to comment
Share on other sites

This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and possibly forgotten) topic.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...