Cromulon1994 Posted April 13, 2020 Share Posted April 13, 2020 I've been into using Birchwood Casey's aluminium black for a few years now. Works on zinc alloys a treat. It has been giving a better than paint, but not quite there finish since I've been using it, following instructions, looking on threads where people have used it on the rpf ect. I've been experimenting with it, and today I've had a bit of a result. Warm metal parts, kept warm throughout the process, cleaned with acetone, apply the blackener with a cloth. Give it a couple of layers, dry off the excess. Almost immediately after, I've been using t cut scratch remover, same cloth, polished the surface. It really now does look like gunmetal. We're all bored at home, it's easy and it looks so much better than paint. On the last photo you can see dull bits around the frame that haven't been finished at the time of the photo. Link to comment Share on other sites More sharing options...
Supporters Adolf Hamster Posted April 13, 2020 Supporters Share Posted April 13, 2020 very nice, i take it you're doing this to bare metal? i must admit i'd love to get a nice blued finish on the makarov but been too worried about mucking it up to actually do it. Link to comment Share on other sites More sharing options...
Cromulon1994 Posted April 13, 2020 Author Share Posted April 13, 2020 Yes on bare metal. It's easier than painting you wont mess it up. Link to comment Share on other sites More sharing options...
Guest Posted April 13, 2020 Share Posted April 13, 2020 Awesome job, genius level warming the parts 👍🏻 Link to comment Share on other sites More sharing options...
Diemaco Posted April 13, 2020 Share Posted April 13, 2020 How does it hold up? Is it a durable finish at all? Link to comment Share on other sites More sharing options...
Cromulon1994 Posted April 13, 2020 Author Share Posted April 13, 2020 Yes it is, though if you were to scratch it it's dead easy to touch up. Link to comment Share on other sites More sharing options...
Supporters Adolf Hamster Posted April 13, 2020 Supporters Share Posted April 13, 2020 Hmm, i wonder if i should see this as an excuse to get another makarov..... Link to comment Share on other sites More sharing options...
EDcase Posted April 13, 2020 Share Posted April 13, 2020 Here's a Sten I did. Might give it another treatment when I get some more gun blue. (Used Philips gun blue) A video I saw recommended leaving oil on the parts for 24 hrs after to make it more permanent and durable. Link to comment Share on other sites More sharing options...
MarkP1988 Posted April 14, 2020 Share Posted April 14, 2020 Do you have a link to the product you used? Looking on Amazon I can find plenty of gun blues but they appear to be for steel rather than zinc alloys? Link to comment Share on other sites More sharing options...
EDcase Posted April 15, 2020 Share Posted April 15, 2020 Birchwood Casey aluminium black Philips gun blue for steel Link to comment Share on other sites More sharing options...
Cromulon1994 Posted April 15, 2020 Author Share Posted April 15, 2020 10 hours ago, EDcase said: Birchwood Casey aluminium black Philips gun blue for steel I've never used one of the chemicals for doing steel, only lots of heat and oil. Link to comment Share on other sites More sharing options...
EDcase Posted April 15, 2020 Share Posted April 15, 2020 I prefer the cold method for: - Less stress on the parts (they're not the best quality metals) - Don't have to fully disassemble - No chance of burning down the building Link to comment Share on other sites More sharing options...
Cromulon1994 Posted April 15, 2020 Author Share Posted April 15, 2020 Yeah I get its probably a better method. Tbh I did a sten too, which is pretty much all mild steel and simply made. Stainless steel stock tube though which is odd. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.