Enid_Puceflange Posted October 24, 2022 Share Posted October 24, 2022 37 minutes ago, RostokMcSpoons said: Contrast that sterling effort from Mr Chewer with me rocking up at Special Ops with one of those big blue plastic Ikea bags with three or four guns poking out, and a rucksack full of mags 'n' shit ;D Skullchewer and Rogerborg 2 Link to comment Share on other sites More sharing options...
Skullchewer Posted October 24, 2022 Share Posted October 24, 2022 12 hours ago, Lozart said: I knew you'd get it 🤣 Rogerborg and Lozart 2 Link to comment Share on other sites More sharing options...
Supporters Lozart Posted October 25, 2022 Supporters Share Posted October 25, 2022 11 hours ago, Skullchewer said: I knew you'd get it 🤣 I'm a little disappointed that the rifle doesn't say "Vera" on it anywhere. Just to add I am sat wearing this sweatshirt... Rogerborg, SSPKali and Skullchewer 1 2 Link to comment Share on other sites More sharing options...
Skullchewer Posted October 25, 2022 Share Posted October 25, 2022 (edited) 3 hours ago, Lozart said: I'm a little disappointed that the rifle doesn't say "Vera" on it anywhere. Just to add I am sat wearing this sweatshirt... Vera is having her makeup done. I felt that putting Vera on her might be a bit on the nose so I was actually considering putting Blue Sun on it, funnily enough! 2 minutes ago, Skullchewer said: Far from finished. ockquote widget Edited October 25, 2022 by Skullchewer Lozart and Rogerborg 1 1 Link to comment Share on other sites More sharing options...
Supporters Rogerborg Posted October 25, 2022 Supporters Share Posted October 25, 2022 14 hours ago, Lozart said: I'm a little disappointed that the rifle doesn't say "Vera" on it anywhere. Just to add I am sat wearing this sweatshirt... You sit down at this table and place that bet, you best be sure you bring the scrip to be raised. Skullchewer and Lozart 1 1 Link to comment Share on other sites More sharing options...
Skullchewer Posted October 26, 2022 Share Posted October 26, 2022 Gorram it, if I had time I would totally rethink my Halloween game day outfit! Link to comment Share on other sites More sharing options...
Supporters Tackle Posted October 26, 2022 Supporters Share Posted October 26, 2022 Vera ?......... Blue sun ?........ Not got a clue wot you kids are on about ? 🤔 Skullchewer 1 Link to comment Share on other sites More sharing options...
Supporters Rogerborg Posted October 26, 2022 Supporters Share Posted October 26, 2022 6 minutes ago, Tackle said: Vera ?......... Blue sun ?........ Not got a clue wot you kids are on about ? 🤔 Just some Space Trek thing that ran for 11 seasons in the 1990s. 2 hours ago, Skullchewer said: Gorram it, if I had time I would totally rethink my Halloween game day outfit! The tightest of tight pants? Tackle and Skullchewer 1 1 Link to comment Share on other sites More sharing options...
PopRocket123 Posted October 26, 2022 Share Posted October 26, 2022 12 hours ago, Rogerborg said: You sit down at this table and place that bet, you best be sure you bring the scrip to be raised. You better tell me wear you got that or I swear by my pretty little bonnet I will end you Lozart and Rogerborg 2 Link to comment Share on other sites More sharing options...
Supporters Rogerborg Posted October 26, 2022 Supporters Share Posted October 26, 2022 3 hours ago, PopRocket123 said: You better tell me wear you got that Mrs Borg knitted the bonnet. The patch was eBayed and cap-riveted onto my regular summer riding jacket for peak used-future aesthetics - the colours match up pretty well. PopRocket123 and Skullchewer 2 Link to comment Share on other sites More sharing options...
Supporters Lozart Posted October 26, 2022 Supporters Share Posted October 26, 2022 Shiny. Let's be bad guys. Skullchewer and Rogerborg 1 1 Link to comment Share on other sites More sharing options...
Skullchewer Posted October 26, 2022 Share Posted October 26, 2022 2 hours ago, Lozart said: Shiny. Let's be bad guys. Source? Link to comment Share on other sites More sharing options...
Supporters Lozart Posted October 27, 2022 Supporters Share Posted October 27, 2022 15 hours ago, Skullchewer said: Source? https://patchpanel.ca/products/aim-to-misbehave Oh yeah....it glows in the dark too. Skullchewer 1 Link to comment Share on other sites More sharing options...
RobHedley Posted October 28, 2022 Share Posted October 28, 2022 My purchase of the famous Austrians Plate Carrier presented me with a slight problem. MK5 Thunderflash don’t easily fit in the fancy laser cut MOLLE (although Mk4 Osprey pouches fit like a glove!!) so I had to come up with a solution. I jumped into Fusion 360 and designed a holder for 4 thunder flashes and can be Velcro attached to where ever there is spare Velcro on the PC. 3D printed in black and then tensioned with shock cord. Very pleased with my invention (although I did get the original idea from a post on this very forum, sorry can’t find the original poster, thanks for the idea anyway). SSPKali, PopRocket123, Skullchewer and 1 other 3 1 Link to comment Share on other sites More sharing options...
RobHedley Posted November 1, 2022 Share Posted November 1, 2022 I can’t stop making stuff!!! My first ever Airsoft rifle was a second hand G36 which came with an underslung grande launcher and 4 40mm Grenades (the sort that shoot a load of BBs and a rubber bung). This has been sat in a cupboard for years so I decided to try to make use of it. As I don’t use the G36 anymore, I wanted to make it stand alone. I stripped the hand guard off the launcher and designed a top to it that will hold the now detached aiming thingy (what ever they are called). 3d printed it out and now I have a grenade launcher that looks similar to a M320 minus the stock and fore grip. Skullchewer, Rogerborg and TheFull9 3 Link to comment Share on other sites More sharing options...
Skullchewer Posted November 1, 2022 Share Posted November 1, 2022 My Cyma M052, modified to fit tag shells, and now given a facelift. The paint job has been on it since just after I bought it. Last week I made a wood grip from scratch. ConsideringI've not done woodwork since school in pretty pleased with how it's turned out. RobHedley and Lozart 2 Link to comment Share on other sites More sharing options...
SheriffHD Posted November 2, 2022 Share Posted November 2, 2022 On 01/11/2022 at 17:26, Skullchewer said: My Cyma M052, modified to fit tag shells Out of interest what did you need to modify to get it to fire tag shells? Link to comment Share on other sites More sharing options...
Skullchewer Posted November 2, 2022 Share Posted November 2, 2022 12 minutes ago, SheriffHD said: Out of interest what did you need to modify to get it to fire tag shells? A file or a Dremel. That's all. Inside the main chamber there's a lip. This lip prevents moscarts from falling out of the barrel. If you file down the lip tag shells will fit in nice and snug. Of course this means that if you try and use moscarts again they may fall out, so useless for them. Make sure you grind it off evenly, so the tag shell sits centralised in the chamber. Been using it for about a year with this modification and it works perfectly. Rogerborg 1 Link to comment Share on other sites More sharing options...
SheriffHD Posted November 3, 2022 Share Posted November 3, 2022 13 hours ago, Skullchewer said: A file or a Dremel. That's all. Inside the main chamber there's a lip. This lip prevents moscarts from falling out of the barrel. If you file down the lip tag shells will fit in nice and snug. Of course this means that if you try and use moscarts again they may fall out, so useless for them. Make sure you grind it off evenly, so the tag shell sits centralised in the chamber. Been using it for about a year with this modification and it works perfectly. Hmm seems odd, only ask as I got an m052 last year and I've been shooting tags from it fine without any issues and didn't need to modify anything. Wounder if there was a change in design since. Link to comment Share on other sites More sharing options...
Skullchewer Posted November 3, 2022 Share Posted November 3, 2022 30 minutes ago, SheriffHD said: Hmm seems odd, only ask as I got an m052 last year and I've been shooting tags from it fine without any issues and didn't need to modify anything. Wounder if there was a change in design since. Must have been. My friend just bought one and I had to file his too. Maybe they changed it as they realised people want to use tags in them. Rogerborg 1 Link to comment Share on other sites More sharing options...
Popular Post Skullchewer Posted November 12, 2022 Popular Post Share Posted November 12, 2022 So, as can be seen in THIS POST, I bought a crappy cheap mandible for my helmet. It did not go well. However, I was able to salvage the arms that attached the mandible to the helmet rail, and I had an old mask that I've never used knocking around. Some measuring, fiberglass paste, sanding, more measuring, drilling and finally painting..... JustMark, concretesnail, PopRocket123 and 3 others 3 3 Link to comment Share on other sites More sharing options...
Khyber Posted November 12, 2022 Share Posted November 12, 2022 1 hour ago, Skullchewer said: So, as can be seen in THIS POST, I bought a crappy cheap mandible for my helmet. It did not go well. However, I was able to salvage the arms that attached the mandible to the helmet rail, and I had an old mask that I've never used knocking around. Some measuring, fiberglass paste, sanding, more measuring, drilling and finally painting..... Solid work there matey. Great job! Skullchewer 1 Link to comment Share on other sites More sharing options...
Emergencychimps Posted November 12, 2022 Share Posted November 12, 2022 That mandible looks the bollocks, nice one Skullchewer 1 Link to comment Share on other sites More sharing options...
concretesnail Posted November 12, 2022 Share Posted November 12, 2022 Looks good and I'm not usually a fan of mandibles Skullchewer 1 Link to comment Share on other sites More sharing options...
Supporters Tackle Posted November 12, 2022 Supporters Share Posted November 12, 2022 2 hours ago, Skullchewer said: So, as can be seen in THIS POST, I bought a crappy cheap mandible for my helmet. It did not go well. However, I was able to salvage the arms that attached the mandible to the helmet rail, and I had an old mask that I've never used knocking around. Some measuring, fiberglass paste, sanding, more measuring, drilling and finally painting..... Great work mate, I bet you look like Predator with your dreads hanging out the back. Skullchewer 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now