Jump to content

What have you made?


AK47frizzle

Recommended Posts

1333840544_Scopezoomlever.jpg.bb0ab0b629bee85ffbefb6ae21ddd9b1.jpg

The Breakaway Coaster doohickies arrived from eBay.   With a bit of dremelling I gouged a chunk out of the inside to accommodate the existing zoom lever hump... and I have to say this is an excellent "Extended zoom lever mod" for a mere £6.

Video explaining the fitting and the dremel work... https://www.youtube.com/watch?v=4X4t6mK_Yz4

 

Link to comment
Share on other sites

  • Supporters
1 hour ago, RostokMcSpoons said:

1333840544_Scopezoomlever.jpg.bb0ab0b629bee85ffbefb6ae21ddd9b1.jpg

The Breakaway Coaster doohickies arrived from eBay.   With a bit of dremelling I gouged a chunk out of the inside to accommodate the existing zoom lever hump... and I have to say this is an excellent "Extended zoom lever mod" for a mere £6.

Video explaining the fitting and the dremel work... https://www.youtube.com/watch?v=4X4t6mK_Yz4

 

 

I've had a couple of those on my scopes for a while! Dead handy and cheap!

Link to comment
Share on other sites

  • 3 weeks later...
Just now, Tactical Pith Helmet said:

You could crucify dwarves on that.  


 

Yeah! 😂

 

Might have to make a mk2 and adjust the height of the crossbar to make it slightly less religious, but more importantly actually lift my pc a couple of inches higher 👍

Link to comment
Share on other sites

12 hours ago, Enid_Puceflange said:


 

Yeah! 😂

 

Might have to make a mk2 and adjust the height of the crossbar to make it slightly less religious, but more importantly actually lift my pc a couple of inches higher 👍

 

Surely it's easier to just sling some additonal blocks under the 'feet' of it? 😂

Link to comment
Share on other sites

1 hour ago, alxndrhll said:

 

Surely it's easier to just sling some additonal blocks under the 'feet' of it? 😂


That won’t really do the job

As the lowest part of the PC and the dangler pouch on the front are currently resting on them

Edited by Enid_Puceflange
Link to comment
Share on other sites

  • 3 weeks later...
  • 2 weeks later...
46 minutes ago, mightyjebus said:

Battery extender for KWA sliding stocks.

 

 

If I could make a suggestion - extend it all the way back into the butt-pad cavity so it butts up against the flat section at the back. It'll act as a stabiliser to help to reduce flex/wobble. Also gives you more battery/wiring space.

 

 

 

Link to comment
Share on other sites

8 hours ago, Speedbird_666 said:

 

 

If I could make a suggestion - extend it all the way back into the butt-pad cavity so it butts up against the flat section at the back. It'll act as a stabiliser to help to reduce flex/wobble. Also gives you more battery/wiring space.

 

 

 

not a bad idea.

Link to comment
Share on other sites

A build in progress. Transplanting an AUG hop unit into my S&T M249. I've had feeding issues and low power in it right from day one so decided to try this before I retire and replace it.

PA100001.thumb.JPG.cb91737583682827696a65af341b5bec.JPG

More work to do yet, but as of today I've got it feeding and the power level is up. I fitted an adjustable nozzle which I'll need to dial in fully yet. Planning to give it a shake down at the next game day to see how it performs.

PA100004.thumb.JPG.399a1c31634c77c61894684053026417.JPG

Edited by Nick G
Link to comment
Share on other sites

PA170001.thumb.JPG.f36db44823b93ee4c60cff198beacb23.JPG

PA170003.thumb.JPG.371d31b20d9c943cb98ae23e40534f55.JPG

PA170004.thumb.JPG.3ec7bb4c855b2ac6a09ea25471789c6d.JPG

BB feed now in place, by opting for a side feed I can use my existing Classic Army box mag, which handily has a quick release for the feed. Sits behind the bullet belt nicely. Tried it today in a mate's orchard and it feeds fine and was hopping .25's with plenty of adjustment stil available. Now it's feeding I'll play with the nozzle and find the longest length that will still feed. At the moment it's set at a conservative length. It's getting there.

Link to comment
Share on other sites

Received my free sample of ShadowFoam yesterday

Just enough to try out in one of my pistol cases

Decent stuff, easy to work with, looks tidier than the pick n pluck foam that I’ve tried before, that seems to easily misshape without much effort 

 

52B0F792-F147-4069-8892-9D40AC662F3E.thumb.jpeg.d39dd86fc4db7ba3a38dbb5da1cce3b5.jpeg

Link to comment
Share on other sites

  • Supporters
On 22/10/2022 at 21:59, Skullchewer said:

Cut the Shadowfoam for my MP5K, and my "very favourite gun". All my cases now have Shadowfoam, the MP5K has room for a friend then I'll do something in the lid.

IMG_20221022_215300117.jpg

IMG_20221022_215314015.jpg

 

ill-be-in-my-bunk-19981351.png.e1514dbf202ed55e416197afb7ddc6b1.png

Link to comment
Share on other sites

Contrast that sterling effort from Mr Chewer with me rocking up at Special Ops with one of those big blue plastic Ikea bags with three or four guns poking out, and a rucksack full of mags 'n' shit ;D

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...