Jump to content

What have you made?


AK47frizzle

Recommended Posts

Mark II Goggle fan mount with integrated on/off switch.

 

image.png.01d11de3fe1a0e8f2353f0226d474506.png

 

 

Tested fitted - just need to solder up a switch - and find some black screws.

 

image.png.5676b5cb37599805bc3cf0718da7e629.png

 

image.png.720a4f622cc9864c462f692b1245b1cc.png

 

Next step - goggle strap mounted battery enclosure.

Link to comment
Share on other sites

3 hours ago, Speedbird_666 said:

Mark II Goggle fan mount with integrated on/off switch.

 

image.png.01d11de3fe1a0e8f2353f0226d474506.png

 

 

Tested fitted - just need to solder up a switch - and find some black screws.

 

Next step - goggle strap mounted battery enclosure.


 

I really need to get a 3D printer but I might miss making shit with my hands - those resin printers look sexy tho……

 

 

@mightyjebus I might “if” I was you and since you seem to have a 3D printer* I would serious think about encasing those rare earth magnets with a case of some sort cuss when they get a sharp shock they have been known to shatter - think of your eyes buddy :)

 

*as I don’t currently have one I would use some Sugru just to stop anything coming away.

Edited by MiK
Link to comment
Share on other sites

5 hours ago, Rogerborg said:

Great work all round. I'm starting to get performance anxiety about my gobs of hot melt glue and Poundland rattle can black now. :D 

Armature. No finess. Lol😉

The pound land black is great though👍done our birdbath with it 20 times now. Doh! Wait a minute....

Regards 

Link to comment
Share on other sites

4 hours ago, MiK said:


 

I really need to get a 3D printer but I might miss making shit with my hands - those resin printers look sexy tho……

 

 

@mightyjebus I might “if” I was you and since you seem to have a 3D printer* I would serious think about encasing those rare earth magnets with a case of some sort cuss when they get a sharp shock they have been known to shatter - think of your eyes buddy :)

 

*as I don’t currently have one I would use some Sugru just to stop anything coming away.

yeah I had the same idea..either print something or wrap them in Sugru as I have a load of black packets here not getting used.

Link to comment
Share on other sites

  • Supporters
On 29/06/2021 at 14:57, MiK said:

@mightyjebus I might “if” I was you and since you seem to have a 3D printer* I would serious think about encasing those rare earth magnets with a case of some sort cuss when they get a sharp shock they have been known to shatter - think of your eyes buddy :)

OR go old school and use a fold over piece of 100mph sticky tape ? 😉

remember children K.I.S.S. 👍

Link to comment
Share on other sites

Mk III fan mount fully finished, working and mounted, Mk I Goggle strap Battery box done (looks bigger in the picture than it actually is).

 

image.png.b8e2e62f1a1a211c3c0cdf619d1a2575.png

 

Battery box needs refinement - I forgot to radius the edges.

 

Mk II will be on the printer later today.

image.png.8f38d21b582e15523a5dbe43ca5f4f6b.png

 

 

 

Link to comment
Share on other sites

13 hours ago, Speedbird_666 said:

Mk III fan mount fully finished, working and mounted, Mk I Goggle strap Battery box done (looks bigger in the picture than it actually is).

 

image.png.b8e2e62f1a1a211c3c0cdf619d1a2575.png

 

Battery box needs refinement - I forgot to radius the edges.

 

Mk II will be on the printer later today.

image.png.8f38d21b582e15523a5dbe43ca5f4f6b.png

 

 

 

Lookin' fine 👍

Link to comment
Share on other sites

  • Supporters
14 hours ago, Speedbird_666 said:

Mk III fan mount fully finished, working and mounted, Mk I Goggle strap Battery box done (looks bigger in the picture than it actually is).

 

Battery box needs refinement - I forgot to radius the edges.

 

Mk II will be on the printer later today.

 

Given the big ol' difference between quality ballistic rated goggles and the same goggles but with a fan, I think there's a huge need for simple ready-made kits (or at least the plans/links grouped together online) based on some common and popular goggle types in order for people do to these mods themselves.

Link to comment
Share on other sites

Not exactly as polished as what’s being shown off in this thread but…

 

Got really frustrated reloading my new HPA DMR build so necessity being the mother of innovation, this happened24038EFB-6A27-4B34-B2D6-2F173A4DB686.thumb.jpeg.81e00ddcc976b27bb78c383305054ed6.jpeg50CCF91E-071B-43E5-81BF-B9428597EF4E.thumb.jpeg.f83e9f9a51e0acf11c57ff500bb3c598.jpeg

A3FD8982-7C40-438C-97F2-FB902B19807A.jpeg

Link to comment
Share on other sites

9 minutes ago, Adolf Hamster said:

and you were doing so well too.....

image.png.2be7565a6e4e1a981214fa718082e02d.png

 

Ive got some 130rd mid caps for when I can get a Tanuki Works HPA adaptor, until then, changing the mag and line was too much of a pain in the middle of a game to put up with. 
 

I’ll need to see if the mechanism in the drum is capable of pushing up 0.43’s or it’s a bit of a pointless endeavour

Link to comment
Share on other sites

1 hour ago, Alimcd said:

Not exactly as polished as what’s being shown off in this thread but…

 

Got really frustrated reloading my new HPA DMR build so necessity being the mother of innovation, this happened24038EFB-6A27-4B34-B2D6-2F173A4DB686.thumb.jpeg.81e00ddcc976b27bb78c383305054ed6.jpeg50CCF91E-071B-43E5-81BF-B9428597EF4E.thumb.jpeg.f83e9f9a51e0acf11c57ff500bb3c598.jpeg

A3FD8982-7C40-438C-97F2-FB902B19807A.jpeg

Jesus Christ... That's impressive

Link to comment
Share on other sites

Ran 400 or so 0.28’s through it this morning. Dialled in the regulator but then found it’s creeping a bit when I go up to 0.43’s so ended up having to set the regulator again… 
 

I’m very happy that it feeds the 0.43’s fine and I’m getting a consistent 299-305fps @95ish psi. Only slight issue is it looks a little daft but with 2500rd capacity, zero feeding issues and a consistent output I can live with that! 
 

Im going to tidy up the JB Weld once it’s completely cured and then probably go over it with some black paint.

 

AF674751-60BF-48F5-B640-15AA492EB638.jpeg

Edited by Alimcd
Link to comment
Share on other sites

A now fully functional (but not yet pretty) front loading 12 gram co2 cartridge powered tag launcher with adjustable regulator. A nice casing is in the works. Did have to ditch the idea of a trigger mech and use a button for now but the final version should hopefully have something nicer. 

IMG_6371.JPG

Link to comment
Share on other sites

Modern British plumbing at its finest.😉

Tell me,does your name begin with Frank and end in stien? Lol

Looks the biz though👍

Regards 

Link to comment
Share on other sites

  • Supporters

My old STAR L86 finally started to fail on me, so I wanted to HPA it. Unfortunately the offset nozzle really limited my options, so I printed and modified a shell to fit a Polarstar F2.

IMG-5228.JPG

IMG-5232.jpg

IMG-5231.jpg

Link to comment
Share on other sites

  • Supporters

@SeniorSpaz87 out of interest mate, given that your in the US, how popular out there are SA80 platform guns, given that over here nearly every man & his dog are running AR platform guns ?.

Link to comment
Share on other sites

  • Supporters
5 hours ago, Tackle said:

@SeniorSpaz87 out of interest mate, given that your in the US, how popular out there are SA80 platform guns, given that over here nearly every man & his dog are running AR platform guns ?.

 

Very rare. You can buy them all but Ive seen maybe a handful myself. And I go to a lot of multi-hundred player MilSims and the like all over the country. 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...