Jump to content

Raider 2.0


Ricardinho
This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and possibly forgotten) topic.

Recommended Posts

Guest DrAlexanderTobacco

Is there no way for you to push the cable back into the stock?

 

You should be able to connect a battery, push the battery and cable into the stock, and then close it.

 

Does the stock have a back plate/butt pad?

Link to comment
Share on other sites

  • Mostly Retired Moderators

Yeah, you should be able to (carefully) smush that thing into the stock tube slightly.

 

Then presumably you aren't going to play too often with the stock all the way in, and your battery is in the sides of the stock so it'll be hidden once you retract your stock.

Link to comment
Share on other sites

Guest DrAlexanderTobacco

That's a good point - I forgot how the retractable stocks can be an issue if closed fully. Try extending the stock fully before closing everything up, then retracting it slowly until you reach a limit.

Link to comment
Share on other sites

I've got the CYMA M4 CQB (very similar to the G&G)

 

The wires are stiff but don't worry about bending them.  (Just don't pinch the bend to make it a sharp fold)

Push the stock into its compact setting (as in photo) and push it all in while trying to twist them into a rough coil.

Link to comment
Share on other sites

0.2g BB weight is what the fps is usually measured with.

 

Batteries/chargers can be found at Hobbyking.com and vapextech.co.uk

Li-Po 7.4v with highest mAh rating that can fit in the gun.  (1300mAh will last a whole day if not going full auto all the time)  Don't worry about the other numbers

 

Spend at least £30 on a charger to keep batteries in good condition and reduce the risk of fire

Link to comment
Share on other sites

  • 4 weeks later...

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...