Andy1966uk Posted August 18, 2019 Share Posted August 18, 2019 Hi folks, new to the forum, and whilst I just bought an ICS L85 which I will contact the shop about, I thought I would see if this is a common issue and if there was a fix that meant I don’t have to send/ship my rifle back for repair. Seems auto fire works fine, however in semi auto it works for a few shots then starts double firing and finally stops firing. Switching back to full auto kind of resets it, but again in semi auto the same will happen. any ideas how this can happen with a brand new rifle ? Link to comment Share on other sites More sharing options...
Asomodai Posted August 18, 2019 Share Posted August 18, 2019 Common issue. Tighten the small screw on the opposite side of the selector switch. It's really easy to strip though so be very careful. If this doesn't work then you'll need to tighten the screw on the cutoff lever on the gearbox. Happened to mine after its second skirmish. Design flaw. Link to comment Share on other sites More sharing options...
Andy1966uk Posted August 18, 2019 Author Share Posted August 18, 2019 Do I need to open the top receiver to access the screw? Or is it accessible from the outside ? btw thanks for replying so quickly, new to forum and Airsoft... Link to comment Share on other sites More sharing options...
Asomodai Posted August 18, 2019 Share Posted August 18, 2019 Just now, Andy1966uk said: Do I need to open the top receiver to access the screw? Or is it accessible from the outside ? btw thanks for replying so quickly, new to forum and Airsoft... The selector screw? No it's the opposite side of the selector. Small cross head. It holds in the selector bolt. The Cutoff lever you'll need to split the receiver. Link to comment Share on other sites More sharing options...
Andy1966uk Posted August 18, 2019 Author Share Posted August 18, 2019 I tried tightening but didn’t help. It’s new from Patrol Base , so will give them a call. Thx Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.