Jump to content

Upgrading my mb03


xive22
This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and possibly forgotten) topic.

Recommended Posts

Im thinking about continueing my project on my well mb03, its been sitting for a good while on my wall so i cant remember what i did to upgrade it but i got a 70m with a spread of about 50 cm so i guess its in a decent shape.

Im thinking about these upgrades.


-PPS CNC Zero Trigger VSR

-Big Dragon WELL MB03 510mm 

-
AirsoftPro Stealcylinder TM AWS 

-
Action Army Hop Up Chamber VSR-10

im not sure about spring guide and what spring i should get, and am i forgetting something? im not really on a thight budget so any suggestions should be fine!

Thank you in advance.

Link to comment
Share on other sites

That cylinder isn't for WELL MB03, its for the TM AWS. Get a full AirsoftPro cylinder set and trigger box set for WELL MB03. AA hop chamber is fine, but that barrel is likely trash. Go for a Maple Leaf CrazyJet VSR barrel, Autobot 60 degree bucking and a Maple Leaf Omega nub.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...