Jump to content

Can you replace any motor for Honey Badger?


Michael K
This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and possibly forgotten) topic.

Recommended Posts

I bought an Nuprol Honey Badger which is an AEG and I also bought a 40000k Motor with it. Will it work properly???

Link to comment
Share on other sites

  • Supporters

40k is a speed motor, not as fast as 45k but pretty quick

(think 30k is a bit sensible snap)

 

keep it on 7.4v - it might run a bit warm

but don't ffs try anything higher than 7.4v or it will wreck

 

20k-25k you can run on 11.1v most likely

but the faster motors - yeah keep them on 7.4v

it will get a bit warmer than stock motor as it's running faster of course

will drain your battery quicker to as it draws more amps etc....

 

it's ok but keep the voltage sensible @ 7.4v max

Link to comment
Share on other sites

1 minute ago, Sitting Duck said:

40k is a speed motor, not as fast as 45k but pretty quick

(think 30k is a bit sensible snap)

 

keep it on 7.4v - it might run a bit warm

but don't ffs try anything higher than 7.4v or it will wreck

 

20k-25k you can run on 11.1v most likely

but the faster motors - yeah keep them on 7.4v

it will get a bit warmer than stock motor as it's running faster of course

will drain your battery quicker to as it draws more amps etc....

 

it's ok but keep the voltage sensible @ 7.4v max

Cool thanks :) 

I only have 7.4V batteries anyways so that won't be much of a problem thanks for the information tho it was really helpful!

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...