Jump to content
Smooth_Operator

Cybergun FAMAS - Air Nozzle/Gear Position Issues

This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and probably forgotten) thread.

Recommended Posts

I have a Cybergun FAMAS Evo that I've decided to upgrade.

 

I've replaced the nozzle and piston for uprated ones that match the spec of the stock ones. (Nozzle is the correct length and piston has the correct number of teeth).

 

Since upgrading it, the nozzle returns to the wrong position after each shot (as if it partially retracted), meaning it double feeds BBs into the hop.
I've disassembled it and checked the position of all the gears, but no luck... I believe the sector gear should have the pin at the one o'clock position during reassembly, so this is what I've been doing.

 

Does anybody have any ideas/suggestions? I believe the gearbox is a clone of the TM FAMAS gearbox, but with a MOSFET.

 

Share this post


Link to post
Share on other sites
This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and probably forgotten) thread.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...