Solly4568 Posted January 21, 2019 Share Posted January 21, 2019 Creating this thread to help people with their Ares Amoeba Striker problems and to discuss ways they have upgraded and changed their guns Have fun 😀 ProPain87 1 Link to comment Share on other sites More sharing options...
ProPain87 Posted January 21, 2019 Share Posted January 21, 2019 As01 ML 310mm Crazy Jet barrel AA Hop up unit ML decepticon 50 + omega nub Ares short fluted barrel bespoke M150 spring Hawke Panorama 4-12x40 IR Scope AA hop wheel 450fps on .20, 320fps on .04s (1.9J) Shoots far and fairly accurate but I’m not 100% happy with the accuracy so if anyone has any bucking recommendations for me to try. I’ve tried a auto bot 60 and it was shocking with that, much better with the decepticon 50 Got a bespoke cylinder kit and body pin waiting to go in and a Gap trigger sear on its way from Canada Link to comment Share on other sites More sharing options...
Solly4568 Posted January 21, 2019 Author Share Posted January 21, 2019 I know it sounds like a broken record but I would get a maple leaf bucking I have found that they are just the best for almost anything you are building and yeah I am not a fan of the decepticon either. but just for prosperity what range are you getting with the decepticon Link to comment Share on other sites More sharing options...
ProPain87 Posted January 21, 2019 Share Posted January 21, 2019 Both buckings I have are maple leaf (ML) Honestly I have no idea on exact numbers, I don’t have anywhere to test further than my garden (20m) and wouldn’t really like to just guess. I’ve only skirmished it once with this bucking but I got a fair few kills and really enjoyed using it where as with the ml autobot I couldn’t hit a barn door further than 20m away (bbs we’re flying flat for a lot further just hooking left and right) and I got so annoyed with it I put the striker away. Once my new cylinder set goes in I’m going to try it again and try some different weight bbs and see what works the best Link to comment Share on other sites More sharing options...
Solly4568 Posted January 22, 2019 Author Share Posted January 22, 2019 sounds almost like your hop up bucking is not properly seated I would take it apart, reinstall the Autobot just to see if it is a seating issue Link to comment Share on other sites More sharing options...
Solly4568 Posted January 23, 2019 Author Share Posted January 23, 2019 http://www.redwolfairsoft.com/redwolf/airsoft/Accessories_Conversion_Kits_Other_ARES_Compact_Power_Spring_Bolt_for_ARES_Amoeba_STRIKER_S1_Sniper_Rifle_Upgraded_Version.htm guys do you reckon that this is legit, they are selling the upgraded bolt for less than half price Link to comment Share on other sites More sharing options...
E21A Posted January 23, 2019 Share Posted January 23, 2019 7 minutes ago, Solly4568 said: http://www.redwolfairsoft.com/redwolf/airsoft/Accessories_Conversion_Kits_Other_ARES_Compact_Power_Spring_Bolt_for_ARES_Amoeba_STRIKER_S1_Sniper_Rifle_Upgraded_Version.htm guys do you reckon that this is legit, they are selling the upgraded bolt for less than half price Its not really half price by the time you add import duty etc it’ll work out the same as buying from airsoftpro Link to comment Share on other sites More sharing options...
Solly4568 Posted January 23, 2019 Author Share Posted January 23, 2019 yeah but the one from airsoft pro ( that I could find) did not have the stainless steel bolt and only had the bolt internals Link to comment Share on other sites More sharing options...
E21A Posted January 23, 2019 Share Posted January 23, 2019 Ta dah! https://airsoftpro.cz/en/gun-parts-upgrade/sniper-rifles-parts/for-ares-amoeba-striker/kompletni-upgrade-set-c.p.s.b.-pro-ares-amoeba-striker-490-fps-145-ms-detail Be warned, the piston doesn’t work with 90° sears Link to comment Share on other sites More sharing options...
Solly4568 Posted January 23, 2019 Author Share Posted January 23, 2019 not bad google Jedi😀 but if you take shipping into effect then it comes in cheaper to get the one from Redwolf Link to comment Share on other sites More sharing options...
E21A Posted January 23, 2019 Share Posted January 23, 2019 It’s £105 from airsoft pro shipped, I know as I bought one a few days ago. Something at $85 on redwolf shipped to the U.K. will work out after import duty and shipping at the same money, again, I know cos I’ve done it. Link to comment Share on other sites More sharing options...
Solly4568 Posted January 23, 2019 Author Share Posted January 23, 2019 6 hours ago, E21A said: Something at $85 on redwolf shipped to the U.K. will work out after import duty and shipping at the same money, again, I know cos I’ve done it. O crap just realised I was looking at the American sight and that the English version (which I thought was 20 min away from me) doesn't carry the bolt 😭 Link to comment Share on other sites More sharing options...
E21A Posted January 23, 2019 Share Posted January 23, 2019 16 minutes ago, Solly4568 said: O crap just realised I was looking at the American sight and that the English version (which I thought was 20 min away from me) doesn't carry the bolt 😭 Theres loads of stuff the English site doesn’t stock 🙄 The .com site is the Hong Kong?? shop Link to comment Share on other sites More sharing options...
ProPain87 Posted January 23, 2019 Share Posted January 23, 2019 Just seen Lycan have made a new 90 sear for the as01 on eBay. Wish I’d known before I ordered my gap sear 😂 https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F173744345304 Link to comment Share on other sites More sharing options...
ProPain87 Posted January 28, 2019 Share Posted January 28, 2019 My gap sear arrived, can get the rest of the new parts in now and see how it is 😁 Link to comment Share on other sites More sharing options...
Solly4568 Posted January 31, 2019 Author Share Posted January 31, 2019 does anybody know if the shortened striker mags fit in m4 pouches Link to comment Share on other sites More sharing options...
E21A Posted January 31, 2019 Share Posted January 31, 2019 52 minutes ago, Solly4568 said: does anybody know if the shortened striker mags fit in m4 pouches Yes the do, just about Solly4568 1 Link to comment Share on other sites More sharing options...
Skara Posted February 1, 2019 Share Posted February 1, 2019 Don't fit in mine. I have a mix of condor, Helikon and WAS pouches Link to comment Share on other sites More sharing options...
Solly4568 Posted February 2, 2019 Author Share Posted February 2, 2019 look what just came 😮 ProPain87 1 Link to comment Share on other sites More sharing options...
E21A Posted February 2, 2019 Share Posted February 2, 2019 Nice, I’ve just fitted the same but with the airsoftpro internals kit, 90° Sear no likey 45° piston! Link to comment Share on other sites More sharing options...
Skara Posted February 7, 2019 Share Posted February 7, 2019 Parts arrived today, here's what she looks like Will swap the suppressor out for something that actually works, wrap the inner barrel in foam to stop it from vibrating and probably fill the stock with foam as well. Can't wait to test it out this Sunday ProPain87, Solly4568, crusher026 and 1 other 3 1 Link to comment Share on other sites More sharing options...
jay1988 Posted March 2, 2019 Share Posted March 2, 2019 Hi guys Just got my self a Ares striker as01 IV upgraded the sear to a lycan Romeo dear I plan on getting the upgraded stainless bolt and AA hopup is there any other things I should look at upgrading ? Link to comment Share on other sites More sharing options...
Solly4568 Posted March 2, 2019 Author Share Posted March 2, 2019 10 minutes ago, jay1988 said: Hi guys Just got my self a Ares striker as01 IV upgraded the sear to a lycan Romeo dear I plan on getting the upgraded stainless bolt and AA hopup is there any other things I should look at upgrading ? While you have the gun apart, I recommend putting a tight bore inner barrel along with a maple leaf hop up rubber and nub in just to make it easier on you, as this will improve accuracy and allow you to lift even heavier bb’s, although mine happily lifts .4 with the standard hop up Link to comment Share on other sites More sharing options...
jay1988 Posted March 2, 2019 Share Posted March 2, 2019 Is there a specific inner barrel I should look for as I can seem to find a 550mm one Link to comment Share on other sites More sharing options...
E21A Posted March 2, 2019 Share Posted March 2, 2019 Edgi dual bore if you’re staying at that length, helps resolve to poor cylinder to barrel ratio Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now