jordanl2000 Posted December 11, 2018 Share Posted December 11, 2018 Hi looking some advice I bought a new motor for it and the new one just clicks when it is all connected I was wondering if it’s a common issue and what u can do to solve it also video shows what is happening thanks 61BEA5DC-2D96-4378-9351-ED0508D511BA.MOV Link to comment Share on other sites More sharing options...
Supporters Adolf Hamster Posted December 11, 2018 Supporters Share Posted December 11, 2018 video doesn't work, but possibly have you got the connections the wrong way round and the motor's trying to turn backwards against the anti reversal latch? Link to comment Share on other sites More sharing options...
jordanl2000 Posted December 11, 2018 Author Share Posted December 11, 2018 No defiantly the right way Link to comment Share on other sites More sharing options...
Nick G Posted December 11, 2018 Share Posted December 11, 2018 If you connect the motor out of the gearbox does it run when you pull the trigger ? Link to comment Share on other sites More sharing options...
Supporters Rogerborg Posted December 12, 2018 Supporters Share Posted December 12, 2018 Why did you buy a new motor? What was wrong with the old one? Why are you certain that it's connected the right way? Specifically, have you tested the old motor against the new one to see if they spin the same way when wired the same way? This is not a trite suggestion: we have no way of knowing what motor you've put in, or what its intended use is. Is the new motor shaft and spindle the exact same dimensions as the old one? Is the gearbox locked up? Have you released the tension in it using the anti-reversal latch, or split it open? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.