brushwood69 Posted July 9, 2018 Share Posted July 9, 2018 Does anyone know what weight bb the FPS on the hardness scale is measured against? Is the FPS of the chosen bb ? or a standard .20g I'm after a maple leaf for my sniper which is running 495fps on .20s and 350fps on .4s. I put a guarder 80 hard hop rubber on and I cant seem to set the hop without getting massive bb lift at around 55-60m so not sure if this was too hard. Thanks Recommended hardness / FPS combinations: - 50 degree: 280-360 FPS - 60 degree: 295-390 FPS - 70 degree: 360-460 FPS - 75 degree: 425-490 FPS - 80 degree: 490 FPS up Link to comment Share on other sites More sharing options...
Wo1f Posted July 9, 2018 Share Posted July 9, 2018 I wouldn’t use over 75 in anything. Softer tends to anyways be better, at the expense of quicker wear. I would run a 70 bucking in a sniper rifle. 60 for 330-450 and 50 for 280-330. These are maple leaf buckings if it makes a difference. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.