Jump to content

CM Raider FPS Upgrade


Donch
This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and possibly forgotten) topic.

Recommended Posts

Hi all, have a CM Raider that’s not been out the box in a while. Chrono’d and it’s hitting about 235 FPS on 0.25s.

 

Not clued up on springs so any suggestions what would bring it more to the limit?

 

 

Link to comment
Share on other sites

  • Supporters

Im gonna guess it shoots say 275fps on 0.20's

 

Check for a torn/ripped/perished bucking first

 

pi$$ poor seals and weak spring that faded after being stored pre-cocked

 

buy a m105 spring is likely the response and a bit of service inside

think the G&G piston head is crap tbh

 

think you might want a new spring & likely this....

 

https://www.amazon.co.uk/SHS-Tooth-Piston-TT0081-Airsoft/dp/B018KJUQQ0

 

Normally I wouldn't recommend an alloy head but that combo is da nutz

SHS pistons often are bit tight in some boxes - but not in G&G's

That head though heavy is awesome, seriously if you don't get good~great compression then the o-ring is missing

could drop the bearings inside to save some weight (I would - use the G&G 5mm piston spacer)

but best put a bit of thread lock on the screw to be safe

 

m100 spring or element m105

 

ptfe tape on cylinder head, correct AoE

 

yup reckon that will fix it up quite nicely quite cheaply & easily

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...