Jump to content

looking for a cheap g3


GazeTasty
This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and possibly forgotten) topic.

Recommended Posts

im just getting last bits for my german loadout now I just need the gun itself😁 but my budget for it 100-200 quid I have looked everywhere and asked my local shop but they have no idea where to look I have seen cheap ones on dodgy sites but I dont trust them does anyone know any good sites where to get one in that price range? cheers

 

 

this is what style I am after but if there is any others like with a rail system please let me know.

4.jpg

Link to comment
Share on other sites

well you can get the tactical carbine version from patrol the jing gong one 

http://www.patrolbase.co.uk/airsoft/jing-gong-jg094-t3-sas-g3-black.htm#.Wye7LadKhRY

should be cheap and cheerfully but would probably need some upgrades further down the line. plus its uk based.

if you dont mind ordering from the usa, evike got one more suited to you.

https://www.evike.com/products/29823/

 

the downside to these is they are plastic

Link to comment
Share on other sites

  • Supporters
26 minutes ago, Sheepy said:

 

if you dont mind ordering from the usa, evike got one more suited to you.

https://www.evike.com/products/29823/

 

the downside to these is they are plastic

 

Or buy it from the link I posted with no import duty and have it turn up inside a week...;)

Link to comment
Share on other sites

1 hour ago, Lozart said:

 

Or buy it from the link I posted with no import duty and have it turn up inside a week...;)

is it a lot for shipping tho?

Link to comment
Share on other sites

  • Supporters
22 minutes ago, GazeTasty said:

is it a lot for shipping tho?

 

UPS £11.87 WAAAAAAAAYY less than you'd pay getting it from Evike (who are known for their extortionate shipping, not to mention the customs charges etc etc etc).

Link to comment
Share on other sites

2 hours ago, Lozart said:

 

Or buy it from the link I posted with no import duty and have it turn up inside a week...;)

Ye but I’m not going to post the same link twice it’s called options  dude 

Link to comment
Share on other sites

  • Supporters
4 hours ago, Sheepy said:

Ye but I’m not going to post the same link twice it’s called options  dude 

Fair point but the same gun for more money isn't much of an option... 

Link to comment
Share on other sites

2 hours ago, Lozart said:

Fair point but the same gun for more money isn't much of an option... 

You never know I’ve seen guys do it before 😂

Link to comment
Share on other sites

You don't need a rail system for a G3.

There are several clamp on rails that go just in front of the rear sight. These come in a few lengths and styles. And don't have to be expensive.

The most basic type is about £10, And lets you use an optic.  If your optic has a raiser block with a sight hole in the riser then you should be able to use the optic and iron sights.

http://www.patrolbase.co.uk/airsoft-bipod-mount/asg-aeg-mount-mp5-g3.htm#.WyhYSYrTVes

For the front of the gun you have far fewer options. The slim hand guard like in your picture has no upgrade capacity for extras. There are other variants and a couple do have RIS systems for the sides and lower but normally not the upper.

I would pick the variant you want from the start, rather than trying to get  hold of handguards that have other options.

If you want something a bit more special have a chat to @Jez_Armstrong

He does a fair bit to G3's including wood kits, I don't know if he does them for sale or just for himself, but if anyone knows the best of the budget guns it will be him. I believe he uses classic army guns and modifies those. CA make a few variants on the G3 from the standard A3 slim like the one in your picture, right through to short tactical variants.

http://www.classicarmy.com/product_sub.php?cid=266

If you want gun porn go have a look at the LCT G3 range. They recently had a price drop from £400 to £329. But the guns need a bit of a tweak to get them right, so I wouldn't advise one for someone that can't tech themselves. As out of the box the tappet plates need changing, and the cylinder head will need some glue putting on the washer. It'll also want a shim and probably a mosfet. If you can do all that then the LCT has the hands down best externals on the market atm.

https://www.fire-support.co.uk/product/lct-lc-3a3-s-g3a3-green-od-aeg-airsoft-gun


The other option if you want forward ris is to look at something like the classic army SAR. It's still a G3, but with a front that allows for a torch and vertical grip. It also has a metal upper and front end unlike the JG that is all plastic and known for been a touch creaky. The 230mm barrel length shouldn't put you off, you can grab a long suppressor 140mm+ and use it as a barrel extension to get the inner up to a decent length.

https://www.fire-support.co.uk/product/classic-army-sar-offizier-m41-fs-airsoft-gun-aeg-sale

 

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...