Jump to content

Help bought silencer/doesn't fit! Aks74u


Ballist1x
This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and possibly forgotten) topic.

Recommended Posts

Hi so I done goof. I have a cyma cm045 and picked up an acetech silencer thinking it wluld just screw on...

 

After deconstructing the front of my gun I have no idea how to get this to fit, maybe I need an outer barrel extension but I have no clue what I'm doing here! Can someone help?

 

20180612_193729.jpg

Link to comment
Share on other sites

  • Supporters

See that extension on the suppressor, does it unscrew? Because if it unscrews and is a left hand thread it should go on.

 

It looks like it has a pistol adaptor in it already.

Link to comment
Share on other sites

  • Mostly Retired Moderators

Yeah, your AceTech has the pistol adapter in it.

 

Don't screw it the normal direction... You'll tighten it. It screws the opposite way off.

 

Then you'll have M14 thread inside the AceTech to match your barrel.

 

If you intend to use the tracer though, you'll either need an outer Barrel extension. Or shorter inner.

 

Patrol base have just had the Slong barrel extensions in. They seem nice and cheap

 

http://www.patrolbase.co.uk/new-products/Slong-Airsoft

Link to comment
Share on other sites

1 hour ago, L3wisD said:

Yeah, your AceTech has the pistol adapter in it.

 

Don't screw it the normal direction... You'll tighten it. It screws the opposite way off.

 

Then you'll have M14 thread inside the AceTech to match your barrel.

 

If you intend to use the tracer though, you'll either need an outer Barrel extension. Or shorter inner.

 

Patrol base have just had the Slong barrel extensions in. They seem nice and cheap

 

http://www.patrolbase.co.uk/new-products/Slong-Airsoft

 

Cheers bud I actually ordered a 2" madbull barrel extension as I'm not going for a shorter inner barrel so will see how that works works!

 

 

I went for the following but somewhere else that was in stock.

 

http://www.patrolbase.co.uk/airsoft-outer-barrel-ris-rail-systems-hand-guards/2-outer-barrel-extension-14mm-ccw.htm#.WyBMkp_TU0M

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...