Jump to content

APS CAM870 barrel diameter


Pikok123
This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and possibly forgotten) topic.

Recommended Posts

I would like to built double barrel ASG shotgun using as ammo APS shells which I have.

 

Unfortunetly I can't find information about inner diameter of APS CAM870 barrel. Outer diameter is available but in my case it isn't helpfull.

 

I can experiment with diameter but better use the same value like in original replica.

 

I will be grateful  to provide this information by person who have access to APS CAM870.

Link to comment
Share on other sites

  • Supporters

Inner diameter of the barrel at muzzle end is 17.3mm

Inner diameter of the barrel at the breach end is 19.5mm

 

Gun used was an APS CAM 870 SAI MKI using MKi shells.

Link to comment
Share on other sites

  • 1 month later...
On 4/19/2018 at 9:18 PM, Shizbazki said:

Inner diameter of the barrel at muzzle end is 17.3mm

Inner diameter of the barrel at the breach end is 19.5mm

 

Gun used was an APS CAM 870 SAI MKI using MKi shells.

do you know what the diameter of the shell is inside? 

Link to comment
Share on other sites

  • Supporters
11 hours ago, HELIflipper03 said:

do you know what the diameter of the shell is inside? 

do you mean inside the CAM shells as if looking into them?

 

If this is what you mean then 17mm.

 

If you want free WADs you'll need a 17 or 18mm hold punch.

Link to comment
Share on other sites

10 hours ago, Shizbazki said:

do you mean inside the CAM shells as if looking into them?

 

If this is what you mean then 17mm.

 

If you want free WADs you'll need a 17 or 18mm hold punch.

That's exactly what I needed. Thanks!

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...