Jump to content

Valken Airsoft RIS Removal


rossleighton98
This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and possibly forgotten) topic.

Recommended Posts

I've had a Valken Alloy Series MKIII for a while now and I've decided to change the RIS but can't seem to remove the cylinder that connects the RIS to the upper receiver. It seems to be either permanently fixed or just incredibly difficult to unscrew. I don't want to go to extremes and end up breaking it by forcing it so any input would be greatly appreciated! Thanks. 

30657220_772867992908174_6996861987040788480_o.jpg

30689114_772867999574840_1231426012059795456_o.jpg

Link to comment
Share on other sites

  • Supporters

I've never owned this gun but typically it should just twist off. You may need something to use as tension like an AR wrench. It's a solid piece of metal so I wouldn't worry about it bending or snapping. 

 

There aren't any screws that you can see that could be preventing it from twisting? 

Link to comment
Share on other sites

  • Mostly Retired Moderators

Yeah you need an armourers wrench to go across those flats.

 

Doesn't have to be an armourers wrench if you've got a tool that'll do it 

 

The threads in the receiver should hold up to a good old tug (oo-er missus) just don't twist it too hard. 

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...