Jump to content

THE TM MWS thread


Wo1f

Recommended Posts

1 minute ago, alxndrhll said:

 

'I know there are kits out there for lots of money, but I am happy with just a M-Lok handguard plus the shorter outer barrel to go with it.'

 

There are a variety of clone rails of both the BCM MCMR and various Geissele rails out there. Ultimately depends on how much you want you outer barrel protruding out of the hand guard, once you've picked your ideal length then you'll have a better idea of what's available to you.

 

Angry Gun MCMR clones come in 8", 10" and 13" if memory serves correctly. The clone Geissele rails run from 7" up to 13.5" (I think) from a whole host of brands in a variety of flavours. HAO seem to be regarded as having the best MK16 (9.3" and 13.5") rails out there for a decent price. Though I don't believe HAO are currently shipping to the UK due to COVID. I'm sure there are plenty of others, theese are largely just what are 'hot' right now.

 

No idea on outer barrels for the MWS specifcally I'm afraid, and depending on which rail you go for as mentioned by @AlphaBearyou'll possibly need an adapter to get a rail made for AEGs to fit it (the adapters are essentially just a shim which keep everything locked in place).

Yup, HAO ain’t shipping to Blighty yet coz of COVID here. Can’t figure out why that would stop them shipping here but who are we to debate the problems that COVID has caused the global supply chain. One thing is certain, they do make the best clone  rails and kits whether it’s for a MWS, AEG or the infamous PTW. 

.

I have the HAO SMR 10.5” Geissele rail on my NGRS HK416. The quality and machining is second to none. Even the QD points are milspec! 

Link to comment
Share on other sites

23 minutes ago, AlphaBear said:

Yup, HAO ain’t shipping to Blighty yet coz of COVID here. Can’t figure out why that would stop them shipping here but who are we to debate the problems that COVID has caused the global supply chain. One thing is certain, they do make the best clone  rails and kits whether it’s for a MWS, AEG or the infamous PTW. 

.

I have the HAO SMR 10.5” Geissele rail on my NGRS HK416. The quality and machining is second to none. Even the QD points are milspec! 

 

My best guess would be they can't be bothered dealing with the customer service aggro of having things stuck in the mess currently left on global logistics. I imagine constantly replying to impatient folks wears thing after a while, to the point it's not actually worth taking orders requiring shipping to those locations. At least that'd be my suspicion, not so much something they have to do, simply something they're choosing to do until things normalise a bit.

Link to comment
Share on other sites

I second the HAO MK16 rail. It slides over the barrel nut with ridiculous precision and once locked in place, has 0 wobble in any direction. I can’t say the same for my MTW lower and upper though. 
 

I personally use the Angrygun 8” MCMR however I’m not entirely happy with it as it has some small wobble even when fixed in the perfect position (I used C&C outer barrel shims to get it just right. The adapter ring Camoraids used was way too big and they had to grind down the barrel nut to fit it, which was kind of dumb, they should have outer barrel shims on hand, I used two 0.2mm outer barrel shims and now it’s perfect with 0 gap between handguard and upper receiver with a good amount of torque on on the nut. 
 

If I knew about HAO I would have the same handguard on my MWS as I do on my MTW (9.3” MK16) as it’s both cheaper and in my opinion more high quality. 
 

I have the G&P outer barrel system (base + extension) which is perfect for my needs and matches my handguard with perfection which was mostly luck. It was cheap and drop in so I’m happy with it! 

Link to comment
Share on other sites

Look look look. It’s pure mind blowing gun porn is this kit. Sadly so is the price. But you have to pay for quality. Yeah? Then again it’s just a toy pew pew. Right? Or is it? Hmmm

6FB18AA9-7FFD-43CF-B333-47A1729B9BF5.png

Link to comment
Share on other sites

19 hours ago, AlphaBear said:

Look look look. It’s pure mind blowing gun porn is this kit. Sadly so is the price. But you have to pay for quality. Yeah? Then again it’s just a toy pew pew. Right? Or is it? Hmmm

6FB18AA9-7FFD-43CF-B333-47A1729B9BF5.png

The Hao stuff is amazing quality and built to proper tollerences rather than the "may fit, but then again who knows" that other manufacturers seem to use. Plus the time to develop, test and make these limited runs mean that the % of the costs that need recouping from each one is pretty high. If they could shift thousands of them the price would come down 😁

 

TBH it is just a toy gun and no one needs anything better than a CM16 but if you have the means why not get something that floats your boat?

Link to comment
Share on other sites

They seem to be doing a superb job at HAO, at least from the pictures I have seen. And to be fair, buying something that works, having the right tolerances and looks the part - is far from regular in airsoft. I can just not legitimise the price for it though, or should I say, I'd buy a GBLS for that money. Also, I think HAO could be a fun place to work at on a zero hour contract. Measure RS equipment and sometimes from images lay out CAD sketches and run the CNC to a finished product. Small batches and semi creative...

Hey... I just logged in to ask: 

Did someone green gas mod a SAA 35 pmag? Do you think it would be safe with the split construction? D60 project is moving...

 

Link to comment
Share on other sites

On 01/03/2021 at 17:48, Davegolf said:

 

Not really, mostly lazy ppl asking the same questions over and over, magazine stock notifications, shit nozzles and broken return springs :D

 

Some things change, some stay the same lol. I really need to buy another

Link to comment
Share on other sites

So I noticed the O ring and spacer on the flash hider are very oiled up. I am have just got a 10 inch L119A2 angry gun barrel with its own spacer and o ring. Should I soak the o ring in silicon oil?

Link to comment
Share on other sites

3 minutes ago, gunbod007 said:

So I have the Angry gun L119A2 10 inch outer barrel. Doesn't seem to fit the standard TM inner? What have I done!?

DF8F4230-CC14-4F97-AF72-05DBD6D04894 3.JPG

Let me loop in @Uncle Paulyhe may be able to advise as I believe he had some interesting episodes with Angry Gun barrels  😉

Link to comment
Share on other sites

I am this close to just using a small hand file to make it fit, but I don't know how tight this seal has to be for performance etc. Clearly not that important according to angry gun

Link to comment
Share on other sites

Assuming you mean the O ring holding the two halves of the hop unit together, it’s primary function is just that, and stability.

 

No O rings should be soaked in silicone with the sole exception of gas magazines.

 

I would just tickle the outer barrel window larger, so it has the same fit as the TM outer.

Link to comment
Share on other sites

1 hour ago, Davegolf said:

Assuming you mean the O ring holding the two halves of the hop unit together, it’s primary function is just that, and stability.

 

No O rings should be soaked in silicone with the sole exception of gas magazines.

 

I would just tickle the outer barrel window larger, so it has the same fit as the TM outer.

The TM one is actually quite loose tbh and easily slides the inner barrel out.

 

Tried widening slightly using a screw driver but the metal is so soft. 

Link to comment
Share on other sites

For the who don't know here is the Eagle6 MWS barrel assembly video....

 

@gunbod007at around timestamp 3.09min onwards you can see the inner barrel being inserted into the marui outer barrel. If the hop unit doesn't slide in then I suspect the tolerance of the Angry Gun outer barrel aperture is too tight and needs a tad filing out to accommodate the Marui hop unit.. Maybe the angry gun barrel is made specifically for an angry gun hop unit to fit? There's a thought eh? 

 

 

Link to comment
Share on other sites

4 hours ago, Softcore said:

Anyone know where one could buy a stock marui cqbr outer barrel? Or any aftermarket 10.3 inch outer barrel that would fit with the stock barrel nut and front sight post?

I have one, pm me

Link to comment
Share on other sites

Update on the Angry Gun L119A2 outer barrel:

 

Got it machined down and inner now fits in.

 

All assembled. But should The BB just slide out the barrel when loaded if the Hop Up is turned all the way off? I am pretty sure this didn't happen before with the standard outer barrel but I rarely have hop fully off.


I still won't have to hop fully off but could this be a warning sign that something is wrong or misaligned?

 

To be clear. If I cock the weapon and the Hop is fully off. The BBs will literally just roll out the barrel without even being fired. And it's not like it even needs to face straight down. Just the nozzle moving forwards sends the bbs rolling out. So this is making me think I have fucked up the air seal and something isnt sitting right


 

 

 

Link to comment
Share on other sites

23 hours ago, AlphaBear said:

Let me loop in @Uncle Paulyhe may be able to advise as I believe he had some interesting episodes with Angry Gun barrels  😉

 

20 hours ago, Davegolf said:

...I would just tickle the outer barrel window larger, so it has the same fit as the TM outer.


^ This 👍

 

I had to take a file to mine and open up the barrel window as Dave suggests. Very easy to do. Just go slow and check the fit frequently.

Link to comment
Share on other sites

6 minutes ago, Uncle Pauly said:

 


^ This 👍

 

I had to take a file to mine and open up the barrel window as Dave suggests. Very easy to do. Just go slow and check the fit frequently.

Yep I had someone help me machine it down slightly.

 

Any experience with the BBs just rolling out? Very concerned I may have a bad seal or misaligned something now. Going to buy a chronological just to double check.

Link to comment
Share on other sites

33 minutes ago, gunbod007 said:

Yep I had someone help me machine it down slightly.

 

Any experience with the BBs just rolling out? Very concerned I may have a bad seal or misaligned something now. Going to buy a chronological just to double check.


Certainly not something I’m an expert with when it comes to GBBRs, but as far as I’m aware mechanically there is very little difference between GBB, HPA and AEGs when it comes to loading/loading nozzles.

 

A BB running down a barrel with the hop off is entirely normal in many cases. It’s not so much to do with the ‘air seal’ as it is the lip tension in your hop unit. Some hop rubbers will have more tension, some will have less. I could be entirely misremembering but I believe Maple Leaf buckings have more lip tension than most stock buckings... but I’ve been through so many different brands of bucking on so many different RIFs at this point I get lost. If the rubber has a lower amount of tension on the lips it’s often the contact patch alone being depressed into the chamber that prevents them rolling down of their own free will. Conversely, too much lip tension can wear out/break a loading nozzle prematurely.

 

You have all the tools available to you to verify your results. Rather than speculate ‘I don’t think this happens with the stock components in place’, check them. Don’t be lazy, reinstall the original parts and see how it’s performing.

Link to comment
Share on other sites

18 minutes ago, alxndrhll said:


Certainly not something I’m an expert with when it comes to GBBRs, but as far as I’m aware mechanically there is very little difference between GBB, HPA and AEGs when it comes to loading/loading nozzles.

 

A BB running down a barrel with the hop off is entirely normal in many cases. It’s not so much to do with the ‘air seal’ as it is the lip tension in your hop unit. Some hop rubbers will have more tension, some will have less. I could be entirely misremembering but I believe Maple Leaf buckings have more lip tension than most stock buckings... but I’ve been through so many different brands of bucking on so many different RIFs at this point I get lost. If the rubber has a lower amount of tension on the lips it’s often the contact patch alone being depressed into the chamber that prevents them rolling down of their own free will. Conversely, too much lip tension can wear out/break a loading nozzle prematurely.

 

You have all the tools available to you to verify your results. Rather than speculate ‘I don’t think this happens with the stock components in place’, check them. Don’t be lazy, reinstall the original parts and see how it’s performing.

Yeah I have checked, it doesn't occur with the standard outer barrel.

Link to comment
Share on other sites

I just checked if a BB rolls out of mine (been a long time since I last fired a BB out of it) :(. Using as six-G nub, Marui hop rubber and zero hop (I do believe) my BB stayed in the hop unit. However, an ever so slight touch made it roll out... when I mean a slight touch it was like feather touch light...

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...