Jump to content

upgrading externals on my cyma


kubskihqs
This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and possibly forgotten) topic.

Recommended Posts

It's alright tbh, gearbox shell is a little brittle, but if you don't run it crazy speeds or crazy fps you'll be fine.
The best shell would be the Lonex gearbox, the parts inside though are mostly okay, some are sub par.

Link to comment
Share on other sites

1 minute ago, kubskihqs said:

Looks good to me, however I wouldn't use an aluminium piston head for normal guns (only for DMR's)
I would run this setup on a 7.4v lipo and no higher as you wont want to do advance tech stuff to stop pre engadgement.

Remeber you need a nozzle, cylidner head and cylinder (cylinder brand doesnt matter)
And a spring and a spring guide :P
Annnnd a trigger switch assembly 

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...