Jump to content

Lipo Batteries?!?! - Ares Amoeba AM-009


J4ck
This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and possibly forgotten) topic.

Recommended Posts

Looking at buying a Ares Amoeba AM-009. It has an electric trigger and a EFCS  gearbox. Im going to wire it to deans,.

 

Just woundering if it will blow up if I use 11.1 Lipo batteries or should I just stick with 7.4's. Found these 3 batteries....

 

1200mAh 11.1 - https://hobbyking.com/en_us/turnigy-nano-tech-1200mah-3s-15-30c-lipo-airsoft-pack-t-connector.html

1200mAh 11.1 - https://hobbyking.com/en_us/turnigy-nano-tech-1200mah-3s-15-30c-lipo-airsoft-pack-t-connector.html

2000mAh 7.4 -   https://hobbyking.com/en_us/turnigy-nano-tech-2000mah-2s-15-25c-lipo-airsoft-pack.html

 

Cheers.

 

Link to comment
Share on other sites

i have one, using it with 11.1v 1200 mAh 15C battery, with a spare 11.1v 1300 mAh 25c..

It's LiPo ready, so you shouldn't have any trouble with it.

 

I'd suggest to replace the bushings with some good quality ones... i have another Amoeba gun (AM 013) and after 2 years the factory bushings were almost done (i run that on 7.4v LiPos)

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...