Jump to content

Newbie with a problem. Help!


MZB
This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and possibly forgotten) topic.

Recommended Posts

Hi all. Getting myself into airsoft and recently picked up a used valken battle machine mod l. 
The gun works fine bar keeps jamming a bb in the hopup. I shine a light up the mag insert and can see half the bb stuck in the hopup/barrel. I give it a little poke with a screwdriver to push it along and then it shoots the bb fine but as soon as I load another mag it jams again.
Thanks in advance I hope it's an easy fix as I love the gun already

Link to comment
Share on other sites

1 minute ago, Samurai said:

Does it do it with a different BB brand? What are you using?

 

Currently using BAW .20g

dont have any other brand as they've always been reliable when using on my CYMA ak47

Link to comment
Share on other sites

4 minutes ago, Samurai said:

Cyma AK is a workhorse. While I don't have experience with BAW, I would suggest trying some better known BB brands. And use 0.20g only for chrono. For playing, use 0.25 at least.

 

Would of thought the cheaper gun would of been less reliable. 

Ill invest in some higher quality .25 then.

also recharging my spare battery to see if that helps 

Link to comment
Share on other sites

is the hop wound off? or have you tired it with the hop wound off?  as above its defiantly worth trying a different and well known brand of bb's.  

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...