Jump to content

Help with batterys - a+k m249


Fat-jd
This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and possibly forgotten) topic.

Recommended Posts

Been banging my head on this subject since yesterday can some just give me a straight yes or no answer please can I run a lipo 7.4v 2s battery in a standard a+k m249 saw with no mosfet or will it toast the gear box here's a pic of the gun I don't want to wreck Resized_20171001_143834_7982.thumb.jpg.4c0256eb5fcd4a99bb502137cf2565da.jpg

Link to comment
Share on other sites

  • Supporters

It'll be fine. You'll need to replace the trigger microswitch at some point regardless because the one they fit is a pile of wank. Replacement is about £3 from Maplins!

Link to comment
Share on other sites

On 01/10/2017 at 8:23 PM, Prisce said:

Yes. I run a standard 7.4V lipo in my M60 with no trouble. You only need the MOSFET for 11.1v lipos.

What c rate / mah are you using how long dose it last roughly 

Link to comment
Share on other sites

  • Supporters

I use the little PEQ box 1200mah 30c nuprol battery(it came with the gun when purchased second hand).

 

It lasts half the day, so we have 3, 1 as back up.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...