Jump to content
davidj123456

Good small compact SMG/Rifle?

Recommended Posts

When I play airsoft I run around with a G18 & a Paratrooper version of the M249. Sometimes when I find a good position I leave the M249 with one of my friends and I sometimes run around with my G18 for a bit. Although the G18 is light and easy to run with it's not always a practical weapon. I'm currently looking for a compact SMG/Rifle that I could easily strap onto myself and run around with even while I carry my M249. I was thinking of getting an MP5K without a stock but even this seems a bit too big. Any recommendations?

 

Share this post


Link to post
Share on other sites

An AEP might work for you. Since the fps limit is 350 for normal AEGs, the low FPS of an AEP is not that big issue.

I was looking at JG MAC10 which is still an AEP but 300 fps. Many people run lower fps AEGs here at skirmishes.

An Mp9 is a great smg that's not much bigger than a pistol and the mag is in the grip, but that's gas, meaning a many heavy mags would be needed. Not ideal.

 

Share this post


Link to post
Share on other sites
27 minutes ago, Samurai said:

An AEP might work for you. Since the fps limit is 350 for normal AEGs, the low FPS of an AEP is not that big issue.

I was looking at JG MAC10 which is still an AEP but 300 fps. Many people run lower fps AEGs here at skirmishes.

An Mp9 is a great smg that's not much bigger than a pistol and the mag is in the grip, but that's gas, meaning a many heavy mags would be needed. Not ideal.

 

My G18 is an AEP. Thing is I need an AEP with a larger magazine so that I won't always have to reload it. I already have a scorpion but I don't really like it. 

MP5K Stockless

Mac-10

MP9

UZI

Tec-9

This is my list of options so far

Share this post


Link to post
Share on other sites

how about the arp9 from G&G, with the stock collapsed it would be quite tiny.

M4 pistol would fit also

 

mp7

 

or this but no idea how to make one for airsoft

 

 

59a84ae84963b_glockdrum.png.4d59bc182439c64cfdbfb33a4b99fbdc.png

Share this post


Link to post
Share on other sites
2 hours ago, gray134 said:

or this but no idea how to make one for airsoft

 

 

59a84ae84963b_glockdrum.png.4d59bc182439c64cfdbfb33a4b99fbdc.png

 

Would be a bitch to get a holster for that mofo

 

TBH - yes you could get a TEC-9 or GAT or FC-SMG but mags would be hard to find

Some of the others would be a bit lame fps or tricky to get parts for

I'd be leaning towards a MP5-K or one with a folding stock to get a bit of flexibility & easy parts etc....

or a stubby M4 but then I'm a bit of a M4 fan

 

If you got defense then you would be hard pushed to beat this for the price:

http://www.taiwangun.com/en/electric-3/g-5k-tgg-x?from=listing&campaign-id=19

I mean it's cheap but worth a look & what is £65 these days

or

http://www.taiwangun.com/en/electric-3/g-5-tgg-x?from=listing&campaign-id=19

Cyma would be more money & better quality

failing that another AEP G18 to go nutz akimbo with

or buy just buy more guns & be done with it

Share this post


Link to post
Share on other sites

just a thought but as you have the g18aep and the m249 how about grabbing a gas gun?

 

i have the ghk g5 which has a folding stock making it quite small - under 16"/400mm when the stock is folded and you can completely remove the stock.  the gun weighs next to nothing although the mags are heavy and hold 38 bbs once the springs and bb lips are broken in.

 

 

Share this post


Link to post
Share on other sites

I think you want to be looking at the MP5K / MP7 / UZI type deal.

 

Classic Army MP5K (http://www.patrolbase.co.uk/Airsoft-smg/classic-army-np5k-mp5k-metal-body-black.htm#.WawPE2SrTx8) could be a good option here. Each mag holds 100rds so you won't be running out of ammo quickly like you might with a Glock 18. 

 

 

Share this post


Link to post
Share on other sites
On 9/3/2017 at 3:22 PM, AshOnSnow said:

I think you want to be looking at the MP5K / MP7 / UZI type deal.

 

Classic Army MP5K (http://www.patrolbase.co.uk/Airsoft-smg/classic-army-np5k-mp5k-metal-body-black.htm#.WawPE2SrTx8) could be a good option here. Each mag holds 100rds so you won't be running out of ammo quickly like you might with a Glock 18. 

 

 

 

Good choice but PATROLBASE  fix up with your proof reading, "carnt" and "swival" tut tut.. 

Share this post


Link to post
Share on other sites
1 hour ago, Albiscuit said:

 

Good choice but PATROLBASE  fix up with your proof reading, "carnt" and "swival" tut tut.. 

 

BUUURRRNNNN!

 

Actually in fairness, I used patrolbase a few times, the one time I had a problem they were a nightmare to deal with - too damn busy with not enough staff I think. Way over "customer capacity" - I was just on hold forever when I tried to call, and never got a response when I emailed. So I think they need to stop focusing on the profit margins so much and start focusing on more staff to, among other things, keep the website well maintained!

Share this post


Link to post
Share on other sites
8 hours ago, AshOnSnow said:

 

BUUURRRNNNN!

 

Actually in fairness, I used patrolbase a few times, the one time I had a problem they were a nightmare to deal with - too damn busy with not enough staff I think. Way over "customer capacity" - I was just on hold forever when I tried to call, and never got a response when I emailed. So I think they need to stop focusing on the profit margins so much and start focusing on more staff to, among other things, keep the website well maintained!

I have had the same, great shop to visit, but had to wait over an hour for an item to be brought upstairs.  called them two weeks ago to ask if an m4 lower reciever they have on the website would fit an ares v2 gearbox and the guy told me "we really only sell whole guns", really disapointing as I had just put together the list of parts to order for a custom build from scratch.  

Share this post


Link to post
Share on other sites
23 hours ago, AshOnSnow said:

 

BUUURRRNNNN!

 

 

In this day and age a decent website is not too much to ask, and copying and paste from the manufacturers pigeon English description is not good enough.

My spellings atrocious so for it to bug me is saying something :)  

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...