Jump to content

How to change nuprol m4 spring


joehugh55@yahoo.co.uk
This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and possibly forgotten) topic.

Recommended Posts

  • Mostly Retired Moderators

This video should help.

Whilst it covers the spring change in a Specna Arms, I'm quite sure it'll be a similar method on your Nuprol.

 

 

The video is a bit dark, but easy to follow.

If it's your first time doing it, take it slow and slow yourself plenty of time.

 

Keep some tubs or cups on the table and keep the bolts and pins in them in a logical progression as you go.

 

You can do it fella! (Shouldn't take you longer than 30-40 minutes for your first time)

Link to comment
Share on other sites

According to the blurb on the Nuprol Delta series, the V2 gearbox fitted to all models comes with a quick change Spring so I would assume you just need to take the rear stock off and unscrew the nut/screw that holds the spring in place?

 

NUPROL - DELTA Enforcer Alpha AEG Carbine - same internal componants as its higher end counterparts like the freedom fighter and the AK21 these are the reinforced V2 gearbox, quick change spring, full steel tooth piston, micro switch trigger high torque flat motor and even a 6.03 tight bore barrel.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...