Jump to content

ICS 551 Swat - Charging handle stuck open :(


Nimbuz
This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and possibly forgotten) topic.

Recommended Posts

Help me please someone!! As you can tell by the title the charging handle (pull back bolt that hides the hopup adjustment) is stuck all the way open. I have tried the switch on the other side of the gun but nothing works.

Im going airsofting for the 1st time in years on sunday so im desperate.

IMG_20170412_181511.jpg

IMG_20170412_182349.jpg

Link to comment
Share on other sites

  • Supporters

Pull back on the charging handle as hard as you can and give the release a sharp tap down.

 

If that doesn't work you will need to seperate the receiver and release it from the inside its only a 10 minute job.

 

On another note if you want to sell the 551 give me a shout.

Link to comment
Share on other sites

6 minutes ago, ImTriggerHappy said:

 

On another note if you want to sell the 551 give me a shout.

 

Fight you for it... ;)

Link to comment
Share on other sites

3 minutes ago, ImTriggerHappy said:

When I have rebuilt it you can buy it and see how good an aeg can be. 

 

I will knock 10% off for your current gun as part ex, and thats generous.

 

 

25% and three nuggets of Airsoft tech wisdom...

Link to comment
Share on other sites

Oh its ok the receiver came off the switch on the opposite side that was meant to release the catch had sheered it did nothing but its an old gun I can still adjust the hopup and the cover is now closed. Thanks for your help Imtriggerhappy :)

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...